Filter
Top Products
Other connections 12
47
En
English
FrançaisDeutsch
Nederlands
Italiano Español
When Bluetooth wireless technology device is
connected:
Bluetooth wireless technology device name
appears in the system display.
1
When Bluetooth wireless technology device is
not connected:
NODEVICE appears in the system display.
3 Start playback of music contents stored in
Bluetooth
wireless technology device.
The following operations are now possible for
Bluetooth wireless technology devices, using
the button at the top of the system and remote
controller.
2
Clearing Pairing
3
1Press
SHIFT+SETUP
, select
BT SETUP
,
then press
ENTER
.
2Use
/
to select
PAIR CLR
, then press
ENTER
.
3 When
CLR OK
appears, press
ENTER
.
The Bluetooth
®
word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Pioneer
Corporation is under license. Other
trademarks and trade names are those of their
respective owners.
Note
1 The system can display alphanumeric characters only. Other characters may not be displayed correctly.
Button What it does
/
(system)
Starts normal playback and
pauses/unpauses playback.
(remote control)
Starts normal playback.
(remote control)
Pauses playback.
(system/
remote control)
Stops playback.
(remote control)
Press to start fast reverse
scanning.
(remote control)
Press to start fast forward
scanning.
(remote control)
Skips to the start of the
current file, then previous
files.
(remote control)
Skips to the next file.
2• Bluetooth wireless technology device should be compatible with AVRCP profile.
• Depending on Bluetooth wireless technology device you use, operation may differ from what is shown in this table.
3 • Clearing should be done with Bluetooth wireless technology device being disconnected.
• When you connect Bluetooth wireless technology device again after clearing, repeat the pairing steps referring to Pairing
Bluetooth ADAPTER and Bluetooth wireless technology device on page 46.
HTZ585DVD_EN.book 47 ページ ２００９年３月１９日 木曜日 午後６時３５分