Filter
Top Products
Additional information
10
43
En
English
FrançaisDeutsch
Nederlands
Italiano Español
Resetting the system
Use the front panel controls to reset all system
settings to the factory default.
• With the system on, press
STANDBY/
ON
while holding down
USB.
The next time you switch on, all the system
settings should be reset.
Using the language code list
Some of the language options (see
Language
settings
on page 27) allow you to set your
preferred language from any of the 136
languages in the
Language code list
below.
1 Select ‘Other Language’.
2 Use
/
to select either a code letter or
a code number.
3 Use
/
to select a code letter or a code
number.
See the
Language code list
(next page) for a
complete list of languages and codes.
ERR MIC
• An error occured during MCACC setup because the microphone is not
connected or is not connected properly.
ERR SP
• An error occured during MCACC setup because the speakers are not connected
or are not connected properly.
MUTING
• An operation is prohibited because the sound is muted (press
MUTE
).
STEREO
• An operation is prohibited because the tuner is selected.
TRAYLOCK
• The tray lock is on. See
General
in
Troubleshooting
on page 40.
KEY LOCK
• The key lock is enabled. See
Key lock setting
on page 35.
PHONESIN
• An operation is prohibited because the headphones are connected.
USB ERR
• See
Important
in
Using the USB interface
on page 23 for more on this.
EEP ERR
• Contact your Pioneer authorized service center or your dealer for servicing.
EXIT
• Appears when a menu is automatically exited after a set period of inactivity.
Message
Description
XV-DV353_555.book 43 ページ ２００６年４月７日 金曜日 午後６時１８分