Filter
Top Products
Listening to your system03
14
En
Chapter 3
Listening to your system
Auto listening mode
The Auto listening mode is the simplest way to
listen to any source as it was mastered: the
output from the speakers mirrors the channels
in the source material.
• See
Using Front Surround
below to get the
best results from a Front surround 3-spot
setup (page 9).
• Press
SURROUND
to select the AUTO
listening mode.
1
Listening in surround sound
You can listen to stereo or multichannel
sources in surround sound.
2
Surround sound
is generated from stereo sources using one of
the Dolby Pro Logic decoding modes.
• See
Using Front Surround
below to get the
best results from a Front surround 3-spot
setup (page 9).
• Press
SURROUND
repeatedly to select a
listening mode.
1
The choices that appear in the display will vary
according to the type of source that’s playing.
•
AUTO
– Auto listening mode (see above)
•
DOLBY PL
(Dolby Pro Logic) – 4.1 channel
surround sound (use with any two-channel
source)
•
MOVIE
(Dolby Pro Logic II Movie) – Pro
Logic II 5.1 channel surround sound,
especially suited to movie sources (use
with any two-channel source)
•
MUSIC
(Dolby Pro Logic II Music) – Pro
Logic II 5.1 channel surround sound,
especially suited to music sources (use
with any two-channel source)
•
STEREO
– See
Listening in stereo
below
Dolby Pro Logic II Music settings
When listening in Dolby Pro Logic II Music
mode, there are three settings you can adjust:
Center Width, Dimension, and Panorama.
1 With Dolby Pro Logic II Music mode active,
press
SOUND
.
2 Use
/
to select ‘C WIDTH’, ‘DIMEN.’ or
‘PANORAMA’ then press
ENTER
to confirm.
•
C WIDTH
(Center Width): Provides a better
blend of the front speakers by spreading
the center channel between the front right
and left speakers, making it sound wider
(higher settings) or narrower (lower
settings).
•
DIMEN.
(Dimension): Adjusts the depth of
the surround sound balance from front to
back, making the sound more distant
(minus settings), or more forward (positive
settings).
•
PANORAMA
– Extends the front stereo
image to include the surround speakers for
a ‘wraparound' effect.
Note
1 If the source is Dolby Digital or DTS, the corresponding indicator lights in the front panel display.
2 Note that when the tuner is selected, multichannel playback is not possible.
SURROUND
SOUND
ADVANCED
TUNE
SOUND
RETRIEVER
TEST
TONE
SURROUND
SOUND
ADVANCED
TUNE
SOUND
RETRIEVER
TEST
TONE
XV-DV353_555.book 14 ページ ２００６年４月７日 金曜日 午後６時１８分