Pioneer HTZ282DVD Home Theater System User Manual


 
Other connections11
44
En
5 Check to see that the
Bluetooth
ADAPTER
is detected by the
Bluetooth
wireless
technology device.
When the Bluetooth wireless technology
device detects the Bluetooth ADAPTER, the
adapter’s identification “AS-BT100” appears in
the Bluetooth wireless technology device list.
1
6From the
Bluetooth
wireless technology
device list, select
Bluetooth
ADAPTER and
enter the PIN code selected in the step 3.
2
Listening to Music Contents of
Bluetooth
wireless technology
device with Your System
1Press
ADAPTER PORT
and to switch to
BT
AUDIO
input mode.
2 Connect the
Bluetooth
wireless
technology device to the
Bluetooth
ADAPTER.
When Bluetooth wireless technology device is
connected:
Bluetooth wireless technology device name
appears in the system display.
3
When Bluetooth wireless technology device is
not connected:
NODEVICE appears in the system display.
3 Start playback of music contents stored in
Bluetooth
wireless technology device.
The following operations are now possible for
Bluetooth wireless technology devices, using
the button at the top of the system and remote
controller.
4
Clearing Pairing
5
1 Press
SHIFT+SETUP
, select
BT SETUP
,
then press
ENTER
.
2Use
/
to select
PAIR CLR
, then press
ENTER
.
3 When
CLR OK
appears, press
ENTER
.
The Bluetooth
®
word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Pioneer
Corporation is under license. Other
trademarks and trade names are those of their
respective owners.
Note
1 When a Bluetooth wireless technology device does not appear in the list of detected devices or has no display, the Bluetooth
wireless technology device list does not appear. In some cases, you may pair the Bluetooth ADAPTER and that Bluetooth wireless
technology device by using the pairing mode.
2 PIN code may in some case be referred to as PASSKEY.
3 The system can display alphanumeric characters only. Other characters may not be displayed correctly.
Button What it does
/
(system)
Starts normal playback and
pauses/unpauses playback.
4• Bluetooth wireless technology device should be compatible with AVRCP profile.
• Depending on Bluetooth wireless technology device you use, operation may differ from what is shown in this table.
(remote control)
Starts normal playback.
(remote control)
Pauses playback.
(system/
remote control)
Stops playback.
(remote control)
Press to start fast reverse
scanning.
(remote control)
Press to start fast forward
scanning.
(remote control)
Skips to the start of the
current file, then previous
files.
(remote control)
Skips to the next file.
5 • Clearing should be done with Bluetooth wireless technology device being disconnected.
• When you connect Bluetooth wireless technology device again after clearing, repeat the pairing steps referring to Pairing
Bluetooth ADAPTER and Bluetooth wireless technology device on page 43.
Button What it does
HTZ180_181_280_282DVD_En.book 44 ページ 2009年3月13日 金曜日 午後2時50分