Pioneer HTD8DVD CD Player User Manual


 
Getting started
04
35
En
1 If the system isn’t already on, press
STANDBY/ON to switch on.
2 Press TUNER to switch to the tuner,
then press repeatedly to select the AM or
FM band.
The display indicates the tuner band and the
frequency.
If you’re using the front panel controls, the
TUNER
button switches between FM, AM
and station presets (see
Memorizing
stations
on page 35).
3 Tune to a frequency.
There are three tuning modes—manual, auto,
and high-speed:
Manual tuning
: Press
TUNE +/–
repeatedly to change the displayed
frequency.
Auto tuning
: Press and hold
TUNE +/–
until the frequency display starts to move,
then release. The tuner will stop on the next
station it finds. Repeat to search for other
stations.
High-speed tuning
: Press and hold
TUNE
+/–
until the frequency display starts to
move rapidly. Keep the button held down
until you reach the frequency you want. If
necessary, fine tune the frequency using
the manual tuning method.
You can use the

and

buttons on the front panel instead of the
TUNE +/–
buttons.
Improving poor FM reception
If you’re listening to an FM station in stereo but
the reception is weak, you can improve the
sound quality by switching to mono.
1 Press SYSTEM SETUP (SHIFT + HOME
MENU).
2 Use the
/
(cursor left/right) buttons
to choose ‘FM Mode ?’, then press ENTER.
3 Use the
/
(cursor up/down) buttons
to select ‘FM Mono’ or ‘FM Auto’, then
press ENTER.
Select
Auto
in step
3
to switch back to auto-
stereo mode (the stereo indicator lights when
receiving a stereo broadcast).
Memorizing stations
You can save up to 30 station presets so that
you always have easy access to your favorite
stations without having to tune in manually
each time.
1 Tune to an AM or FM radio station.
For the FM band, select mono or auto-stereo
reception as necessary. This setting is saved
along with the preset.
2 Press SYSTEM SETUP (SHIFT + HOME
MENU).
3 Use the
/
(cursor left/right) buttons
to choose ‘St. Memory?’ then press ENTER.
4 Use the
/
(cursor up/down) buttons
to select the station preset you want.
There are 30 preset locations; each can store
one station preset.
5 Press ENTER to save the station preset.
If the system is unplugged from the power
supply completely, saved stations will
remain for several days, after which you’ll
have to save them again.
XV-DV88.book 35 ページ 2006年11月9日 木曜日 午後2時28分