Filter
Top Products
Connecting up
02
15
En
Watching progressive scan video from
the component video outputs
Compared to interlace video, progressive scan
video effectively doubles the scanning rate of
the picture, resulting in a very stable, flicker-
free image. Progressive scan video is available
only from the component video output. There
are a few things to keep in mind when
switching the
Component Out
(page 63)
setting to
Progressive
:
• When set to
Progressive
, there is no video
output from the
VIDEO OUT
(composite)
and
S
(S-video) jacks.
• If you want to display video on more than
one monitor simultaneously, make sure
the player is set to
Interlace
.
• If you connect a TV that is not compatible
with a progressive scan signal and switch
the setting to
Progressive
, you will not be
able to see any picture at all. In this case,
press
STANDBY/ON
to put the system
in standby, then press and hold the front
panel
(stop) button for about 8 seconds
until the display shows
Mem.Clr.?
. Press
the front panel
or
button
so that the display shows
Interlace?
. Press
the front panel
button to set to
interlace and switch the system back on.
When TV format is set to
AUTO
or
NTSC
:
• When set to
Progressive
, PAL and NTSC
discs are both output as progressive NTSC
video. See also
TV format setting
on
page 68.
• When set to
Progressive
, there is no video
output from the
VIDEO
and
S-VIDEO
jacks. If you want to display video on more
than one monitor simultaneously, make
sure that it is set to
Interlace
. See also
TV
format setting
on page 68.
When TV format is set to
PAL
:
•
Progressive
cannot be selected. See also
TV format setting
on page 68.
Compatibility of this player with
progressive-scan and high-definition
TVs.
This player is compatible with progressive
video Macro Vision System Copy Guard.
Consumers should note that not all high-
definition television sets are fully compatible
with this product and may cause artifacts to be
displayed in the picture. In case of 525
progressive scan picture problems, it is
recommended that the user switch the
connection to the ‘standard definition’ output
(Interlace). If there are questions regarding our
TV set compatibility with this model, please
contact our customer service center.
XV-DV88.book 15 ページ ２００６年１１月９日 木曜日 午後２時２８分