Filter
Top Products
Switching the RCA output
setting
This units RCA output can be used for sub-
woofer or rear output. You can select either
the subwoofer or the rear output.
1 Press FUNCTION to select P/O.
Press FUNCTION repeatedly until P/O appears
in the display.
2 Push Multi Control left or right to
switch the RCA output setting.
Pushing Multi Control left or right will switch
between P/O:S/W (subwoofer) and P/O:Rear
(rear output) and that status will be dis-
played.
Selecting the digital
attenuator
When listening to a CD or other source on
which the recording level is high, setting the
equalizer curve level to high may result in dis-
tortion. You can switch the digital attenuator
to low to reduce distortion.
! Sound quality is better at the high setting
so this setting is usually used.
1 Press FUNCTION to select D.ATT.
Press FUNCTION repeatedly until D.ATT ap-
pears in the display.
2 Push Multi Control left or right to
switch D.ATT high or low.
Pushing Multi Control left or right will switch
between D.ATT: HI (high) and D.ATT:LOW
(low) and that status will be displayed.
# When the source is Cassette player, the digital
attenuator setting is fixed at Low.
Switching the telephone
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when a call is made or re-
ceived using a cellular telephone connected to
this unit.
! The sound turns off, Mute or ATT is dis-
played and no audio adjustments are possi-
ble.
! Operation returns to normal when the
phone connection is ended.
1 Press FUNCTION to select Mute.
Press FUNCTION repeatedly until Mute ap-
pears in the display.
2 Push Multi Control left or right to select
the desired setting.
Each pushing Multi Control left or right se-
lects settings in the following order:
Mute (muting) 10dB ATT (attenuation)
20dB ATT (attenuation)
20dB ATT has a stronger effect than
10dB ATT.
Switching the Ever Scroll
When Ever Scroll is set to ON, CD text infor-
mation scrolls continuously in the display. Set
to OFF if you prefer the information to scroll
just once.
1 Press FUNCTION to select E.SCL.
Press FUNCTION repeatedly until E.SCL ap-
pears in the display.
2 Push Multi Control up or down to turn
E.SCL on or off.
Pushing Multi Control up or down will turn
E.SCL on or off and that status will be dis-
played (e.g., E.SCL:ON).
Initial Settings
En
47
English
Section
11