Filter
Top Products
Music server function menu
The music server function menu has the follow-
ing functions:
Note:
• If you do not operate the function within about 30
seconds, the display is automatically returned.
(When you select title input modes (P.L.in, TRKin,
ARTin), the display is not returned automatically.)
Repeating play
There are three repeat play ranges for the
music server: one-track repeat, playlist file
repeat and playlist mode repeat.
1. Press FUNC to select the repeat mode.
2. Press RPT to select the repeat range.
Press RPT repeatedly to switch between the
following repeat ranges:
Track repeat (one-track repeat)
= PlayList repeat (playlist file repeat)
= PlayList mode repeat (playlist mode
repeat)
• When the repeat mode is exited, either
“T.RPT” or “P.LISTRPT” may appear on
the basic display.
–“T.RPT” appears while the one-track
repeat is selected.
–“P.LISTRPT” appears while the playlist
file repeat is selected.
Note:
• If you select other playlist files during repeat play,
the repeat range changes to playlist mode repeat.
• If you perform track search or fast forward/reverse
during one-track repeat, the repeat range changes
to playlist file repeat.
Playing tracks in random order
Random play lets you play back tracks in the
playlist file in random order.
1. Press FUNC and then press RDM to
select the random mode.
2. Press RDM to turn random play on.
The light illuminates. Tracks will play in ran-
dom order.
• Press RDM again to turn random play off.
• When the random mode is exited while
random play is on, “RDM” appears on the
basic display.
Note:
• When you select the playlist mode repeat, when the
random play of all tracks in the current file has been
completed, random play will continue on the next
file.
Scanning files and tracks
When you select playlist file repeat, scan play
lets you hear the first 10 seconds of each track
in the selected playlist file. When you select
playlist mode repeat, scan play lets you hear
the first 10 seconds of the first track in each
playlist file.
1. Select the repeat range.
Refer to “Repeating play” on this page.
2. Press FUNC and then press SCAN to
select the scan mode.
3. Press SCAN to turn scan play on.
The light illuminates. The first 10 seconds of
each track in the current playlist file (or the
first track of each playlist file) are played.
• When the scan mode is exited while scan
play is on, “SCAN” appears on the basic
display.
Continued overleaf.
38
ENGLISH ESPAÑOL DEUTSCH FRAN
ÇAIS
ITALIANO NEDERLANDS