Filter
Top Products
Ever SCRL(scroll modesetting)
When EverScroll isset toON, recorded textinforma-
tion scrollscontinuously inthe display.Set toOFF if
you preferthe informationto scroll justonce.
1 PressM.C. toturn theever scroll onor off.
Note
Operation is complete even if the menu is can-
celled before being confirmed.
Other Functions
Using the AUX source
Up to two auxiliary devices such as VCR or
portable devices (sold separately) can be con-
nected to this unit. When connected, auxiliary
devices are automatically readas AUX sources
and assigned to AUX1 or AUX2. The relation-
ship between AUX1 and AUX2 sources is ex-
plained below.
About AUX1 and AUX2
There are two methods to connect auxiliary de-
vices to this unit.
AUX1 source:
When connecting auxiliary device using a stereo
mini plug cable
% Insert the stereo mini plug into the
AUX input jack.
For more details, refer to the installation man-
ual.
This auxiliary device is automatically set to
AUX1.
AUX2 source:
When connecting auxiliary device using an IP-
BUS-RCA Interconnector (sold separately)
% Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separately)
to connect this unit to auxiliary device fea-
turing RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner’s manual.
This auxiliary device is automatically set to
AUX2.
# You can only make this type ofconnection if
the auxiliary device has RCA outputs.
Selecting AUX as the source
% Press SRC/OFF to select AUX as the
source.
# AUX cannot be selected unlessthe auxiliary
setting is turned on. For more details, refer to
AUX1/AUX2 (auxiliary input setting) on the pre-
vious page.
En
16
Section
02
Operating this unit