Filter
Top Products
Initially, the unit is set for rear full-range speak-
er connection (FULL). When rear output is
connected to full range speakers (when FULL
is selected), you can connect other full range
speakers (PREOUT:REAR) or a subwoofer
(PREOUT:SUB W) to the RCA rear output.
1 Display the initial setting menu.
Refer to Adjusting initial settings on page 40.
2 Use MULTI-CONTROL to select REAR SP.
3 Press MULTI-CONTROL to switch the
rear output setting.
Pressing MULTI-CONTROL will switch be-
tween FULL (full-range speaker) and SUB W
(subwoofer) and that status will be displayed.
# When no subwoofer is connected to the rear
output, select FULL (full-range speaker).
# When a subwoofer is connected to the rear
output, select SUB W (subwoofer).
# When the rear output setting is SUB W, you
cannot operate the following procedure.
4 Push MULTI-CONTROL left or right to
switch the subwoofer output or rear out-
put.
Pressing c or d will switch between
PREOUT:SUB W and PREOUT:REAR and that
status will be displayed.
Notes
! Even if you change this setting, there is no
output unless you turn the subwoofer output
on (refer to Using subwoofer output on page
38).
! If you change this setting, subwoofer output
in the audio menu return to the factory set-
tings.
! Both rear speaker lead outputs and RCA rear
output are switched simultaneously in this
setting.
Switching the ever scroll
When ever scroll is set to on, CD text informa-
tion scrolls continuously in the display. Set to
off if you prefer the information to scroll just
once.
1 Display the initial setting menu.
Refer to Adjusting initial settings on page 40.
2 Use MULTI-CONTROL to select
EVERSCROLL.
3 Press MULTI-CONTROL to turn the ever
scroll on.
# To turn the Ever Scroll off, press
MULTI-CONTROL again.
Multi language display setting
Text information such as title name, artist
name or comment can be recorded on a com-
pressed audio disc.
This unit can display them even if they are em-
bedded in a European language or Russian.
! If the embedded language and the selected
language setting are not the same, text in-
formation may not be displayed properly.
! Some characters may not be displayed
properly.
1 Display the initial setting menu.
Refer to Adjusting initial settings on page 40.
2 Use MULTI-CONTROL to select TITLE.
3 Press MULTI-CONTROL to select the de-
sired setting.
Pressing MULTI-CONTROL will switch be-
tween EURO (European language) and
RUSSIA (Russian language) and that status
will be displayed.
Activating the BT AUDIO source
You need to activate the BTAUDIO source in
order to use a Bluetooth audio player.
1 Display the initial setting menu.
Refer to Adjusting initial settings on page 40.
Initial Settings
En
42
Section
04