Filter
Top Products
Introduction of audio
adjustments
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option. Press to se-
lect.
The audio menu is displayed.
3 Turn MULTI-CONTROL to select the
audio function.
Turn MULTI-CONTROL to switch between the
audio functions in the following order.
FADER (balance adjustment)—P. EQ (equali-
zer recall)—EQ (equalizer adjustment)—EQ
(equalizer fine adjustment)—LOUDNESS
(loudness)—SUB W1 (subwoofer on/off set-
ting)—SUB W2 (subwoofer setting)—HPF
(high pass filter)—BASS BOOST (bass boost)
—SLA (source level adjustment)
# You can also select the audio function by
pressing AUDIO on the remote control.
# When the sound is muted or attenuated,
audio function cannot be performed.
# You can select the SUB W2 only when sub-
woofer output is turned on in SUB W1.
# When the subwoofer controller setting is
PREOUT:REAR, you cannot switch to SUB W1
(subwoofer on/off setting). (Refer to page 41.)
# When selecting FM as the source, you cannot
switch to SLA.
# To return to the display of each source, press
BAND/ESC.
# If you do not operate functions within about
30 seconds, the display automatically returns to
the ordinary display.
Using balance adjustment
You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.
1 Display the audio menu.
Refer to Introduction of audio adjustments on
this page.
2 Use MULTI-CONTROL to select FADER.
# If the balance setting has been previously ad-
justed, BALANCE will be displayed.
3 Push MULTI-CONTROL up or down to
adjust front/rear speaker balance.
Each time MULTI-CONTROL is pushed up or
down, the front/rear speaker balance moves
towards the front or rear.
FADER:F15 to FADER:R15 is displayed as the
front/rear speaker balance moves from front to
rear.
# FADER:F/R 0 is the proper setting when only
two speakers are used.
# When the rear output setting is SUB W, you
cannot adjust front/rear speaker balance. Refer to
Setting the rear output and subwoofer controller
on page 41.
4 Push MULTI-CONTROL left or right to
adjust left/right speaker balance.
Each time MULTI-CONTROL is pushed left or
right, the left/right speaker balance moves to-
wards the left or right.
BALANCE :L15 to BALANCE :R15 is displayed
as the left/right speaker balance moves from
left to right.
Using the equalizer
The equalizer lets you adjust the equalization
to match the car’s interior acoustic character-
istics as desired.
Recalling equalizer curves
There are six stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display Equalizercurve
POWERFUL Powerful
NATURAL Natural
Audio Adjustments
En
36
Section
03