Filter
Top Products
! If a Bluetooth audio player is not connected to
this unit yet, AUTO CONNECT and
DEVICE INFO appear in the function menu
and other functions are not available.
! If a Bluetooth audio player is connected via
A2DP (Advanced Audio Distribution Profile),
only AUTO CONNECT and DEVICE INFO ap-
pear in the function menu.
! If you do not operate functions within about
30 seconds, the display automatically returns
to the ordinary display.
Playing songs on a Bluetooth
audio player
1 Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Use MULTI-CONTROL to select PLAY in
the function menu.
3 Press MULTI-CONTROL to start play-
back.
Stopping playback
1 Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Use MULTI-CONTROL to select STOP in
the function menu.
3 Press MULTI-CONTROL to stop the play-
back.
Connecting to a Bluetooth
audio player automatically
! Initially, this function is set to on.
1 Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Use MULTI-CONTROL to select
AUTO CONNECT in the function menu.
3 Press MULTI-CONTROL to turn auto-
matic connection on.
If your Bluetooth audio player is ready for
Bluetooth wireless connection, connection to
this unit is automatically established.
# To turn automatic connection off, press
MULTI-CONTROL again.
Displaying BD (Bluetooth
Device) address
This unit displays the BD address of this unit.
1 Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Use MULTI-CONTROL to select
DEVICE INFO in the function menu.
3 Push MULTI-CONTROL left to switch to
the BD address.
12-digit hexadecimal string is displayed.
# Pushing MULTI-CONTROL right returns to the
device name.
Operating this unit
En
22
Section
02