Filter
Top Products
Adjusting source levels
Source level adjustment (SRC LVADJUST) lets
you adjust the volume level of each source to
prevent radical changes in volume when
switching between sources.
! Settings are based on the FM volume level,
which remains unchanged.
1 Compare the FM volume level with the
level of the source you wish to adjust.
2 Use MULTI-CONTROL to select
SRC LVADJUST.
3 Press MULTI-CONTROL to display the
setting mode.
4 Turn MULTI-CONTROL to adjust the
source volume.
+4 to –4 is displayed as the source volume is
increased or decreased.
# You can also perform the sameoperations by
pushing MULTI-CONTROL upor down.
Note
The MW/LW volume level can also be adjusted
with source leveladjustments.
Audio Adjustments
En
26
Section
03