Filter
Top Products
Introduction of audio
adjustments
1
1 Audio display
Shows the audio adjustment status.
% Press AUDIO to display the audio func-
tion names.
Press AUDIO repeatedly to switch between
the following audio functions:
FAD (balance adjustment)EQ (equalizer
curve adjustment)LOUD (loudness)
SUB.W (subwoofer on/off setting)80: 0
(subwoofer setting)HPF (high pass filter)
BASS (bass boost)FIE (front image enhan-
cer)SLA (source level adjustment)
# When the subwoofer controllersetting is
P/O:FUL, you cannot switchto SUB.W. (Refer to
page 32.)
# You can select the 80: 0 only when subwoofer
output is turned on in SUB.W.
# When the rear output setting is R-SP:S/W,
you cannnot select F.I.E.function.
# When selecting the FMtuner as the source,
you cannot switch to SLA.
# To return to the display of each source, press
BAND.
Note
If you do not operate the audio functionwithin
about 30 seconds, the display is automatically re-
turned to thesource display.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Press AUDIO to select FAD.
Press AUDIO until FAD appears in the display.
# If the balancesetting has been previously ad-
justed, BAL will be displayed.
2 Press a or b to adjust front/rear speak-
er balance.
Each press of a or b moves the front/rear
speaker balance towards the front or the rear.
FAD:F15 FAD:R15 is displayed as the front/
rear speaker balance moves from front to rear.
# FAD : 0 is the proper setting whenonly two
speakers are used.
# When the rear output setting is R-SP:S/W,
you cannot adjust front/rear speaker balance.
Refer to Setting the rear output and subwoofer
controller on page32.
3 Press c or d to adjust left/right speaker
balance.
When you press c or d, BAL: 0 is displayed.
Each press of c or d moves the left/right
speaker balance towards the left or the right.
BAL: L15 BAL : R15 is displayed as the left/
right speaker balance moves from left to
right.
Using the equalizer
The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.
Audio Adjustments
En
26
Section
08