Filter
Top Products
Playing a CD
21
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
1 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
2 Track number indicator
Shows the track currently playing.
1 Insert a CD into the CD loading slot.
Playback will automatically start.
# After a CD has been inserted, press SOURCE
to select the built-in CD player.
# You can eject a CD by pressing EJECT.
2 Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
3 To perform fast forward or reverse,
press and hold c or d.
# If you select ROUGH, pressingand holding c
or d enablesyou tosearch every 10 tracks in the
current disc. (Refer to Selecting the search meth-
od on page19.)
4 To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
! The built-in CD player plays one standard, 12-
cm or 8-cmCD at a time. Do not usean adap-
ter whenplaying 8-cm CDs.
! Do not insert anything other than a CD into
the CD loadingslot.
! If you cannot insert a disc completely or if
after you insert a disc thedisc does not play,
check that the label side of the discis up.
Press EJECTto eject the disc, and check the
disc for damagebefore insertingit again.
! If an errormessage such as ERROR-11 is dis-
played, refer to Understanding built-in CD
player error messages on page 34.
! When a CD TEXT discis inserted, the disc and
track titles begin to scroll to the left auto-
matically.
Built-in CD Player
En
17
English
Section
06