7
<DRB1232>
En
Top Panel
PANEL FACILITIES
BEFORE OPERATIONS
1 POWER switch
(Located on rear panel)
Provides electrical power to the player.
2 Display window ] P. 8
3 DIGITAL JOG BREAK buttons
(JET, ZIP, WAH, HOLD) ] P. 11
4 TRACK SEARCH buttons (4, ¢) ] P. 9
5 SEARCH buttons (1, ¡) ] P. 9, P. 12
6 CUE button/indicator
Three functions are available.
[Setting a Cue Point] ] P. 10
[Back Cue] ] P. 12
[Cue Point Sampler] ] P. 12
[Modify a Cue Point] ] P. 12
7 PLAY/PAUSE button/indicator (6) ] P. 9
8 Loading indicator
Flashes while disc is being loaded or removed
through loading slot, and lights steadily when a disc
is loaded in the player.
9 Force ejection hole ] P. 4
0 EJECT button
When this button is pressed, disc rotation stops and
the disc is ejected from the player's loading slot.
- MASTER TEMPO button ] P. 11
÷ The master tempo function is turned ON/OFF.
÷ If the button is held depressed for 2 seconds or
more, the tempo adjust dial's variable range is
changed (±10% or +10% to –16%). When the vari-
able range is changed, the newly selected numeri-
cal range is displayed for about 2 seconds (10.0 /
16.0).
÷ The variable range is set by default to the ±10 set-
ting whenever power is first turned on.
= TIME MODE/AUTO CUE button
Two functions are available.
[Time display]
Each time this button is pressed, the time display
changes between the elapsed playback time of the
track and the remaining playback time of the track
(REMAIN).
÷ The REMAIN display appears when power is turned
ON.
[Auto Cue function] ] P. 9
When a disc is initially loaded or when performing
track search, this function automatically sets the cue
point (the point immediately preceding actual sound
output).
÷ The Auto Cue function defaults to OFF when power
is first turned on.
~ TEMPO control knob
The playback tempo can be changed with this knob.
The center clicked position is for normal playback
tempo. If you slide the knob (down) towards you (+
side), the music tempo quickens. If the knob is away
from you (– side), the music tempo slows.
! Jog dial (+ FWD/– REV) ] P. 11
@ Disc loading slot ] P. 8
Insert discs with label side up.
÷ When playing 8 cm (3-inch) discs, insert the disc in
a commercially available CD adapter before load-
ing it in the CD player.
# DIGITAL OUT switch ] P. 14
(Located on rear panel)