Filter
Top Products
8
<DRB1297>
En
C Connecting to a component with a digital input terminal
CD recorder or amplifier
with digital inputs
Digital signal cable
÷ Set the Digital mode switch to ON when using the digital output terminal.
NOTE:
When the Digital mode switch is set to ON, the DJ functions (cue, loop, reloop, tempo adjust, hot cue, Jog dial and reverse playback) do not work. And the muted pause
mode is used instead of the audible pause mode.
4. Connecting the power cord
When all connections have been made, connect the power cord to the AC inlet on the rear panel of the player and connect the power plug to an AC wall outlet or to a power
receptacle on the rear panel of the amplifier.
CDJ-1000
3. Connecting to other devices
A Connecting to other mixers
Connect the AUDIO OUT terminal on the unit with the Line In terminal or AUX terminal on the mixer.
(Do not use the Phono terminal. Otherwise the sound will become distorted and prevent normal playback.)
B Connecting to a stereo amplifier (when not using a DJ mixer)
Stereo amplifier
Connect to the AUX input terminal.
(Do not use the Phono input terminal.)
Supplied audio cable
CDJ-1000
BEFORE OPERATIONS: CONNECTIONS