Filter
Top Products
Function and operation
REPEAT, RANDOM, SCAN, PAUSE,
COMP/DBE and TITLE INPUT operations are
basically the same as that of the built-in CD
player.
Function name Operation
REPEAT
Refer to Selecting arepeat play
range on page 18.
But the repeat play ranges you can
select are different from that ofthe
built-in CD player.The repeat play
ranges of the multi-CD player are
as below:
! MCD– Repeat all discs in the
multi-CD player
! TRACK –Repeat just the cur-
rent track
! DISC –Repeat the current disc
RANDOM
Refer to Playing tracks inrandom
order on page 18.
SCAN
Refer to Scanning folders and
tracks on page 18.
PAUSE
Refer to Pausing disc playback on
page 18.
COMP/DBE
Refer to Using compression and
BMX on page 18.
Multi-CD player has DBE (dynamic
bass emphasis) function instead
of BMX.
The settings can be switched as
below:
COMP OFF—COMP 1—COMP 2
—COMP OFF—DBE 1—DBE 2
ITS PLAY
Refer to Using ITSplaylists on this
page.
ITS MEMO
Refer to Using ITSplaylists on this
page.
TITLE INPUT
Refer to Entering disc titles on
page 19.
Notes
! If you select other discs during repeat play,
the repeat play range changes to MCD.
! If you perform track search or fast forward/re-
verse during TRACK, the repeat play range
changes to DISC.
! After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
! When playing a CD TEXT disc on a CD TEXT
compatible multi-CD player, you cannot
switch to TITLE INPUT. The disc title has al-
ready been recorded on a CD TEXT disc.
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
Creating a playlist with ITS programming
You can use ITS to enter and play back up to
99 tracks per disc from up to 100 discs (with
the disc titles). (With multi-CD players sold be-
fore the CDX-P1250 and CDX-P650, up to 24
tracks can be stored in the playlist.)
1 Play a CD that you want to program.
Push MULTI-CONTROL up or down to select
the CD.
2 Use MULTI-CONTROL to select
ITS MEMO in the function menu.
3 Select the desired track by pushing
MULTI-CONTROL left or right.
4 Push MULTI-CONTROL up to store the
currently playing track in the playlist.
MEMORY COMPLETE is displayed and the
currently playing selection is added to your
playlist.
5 Press BAND to return to the playback
display.
Note
After data for 100 discs has been storedin mem-
ory, data for a new disc will overwrite the oldest
one.
Available accessories
En
51
English
Section
03