Filter
Top Products
Switching the button illumination
You can change the color of the button illumi-
nation.
1 Press ILLUMINATION and hold until KEY
appears in the display.
2 Press ILLUMINATION to select a button
illumination color.
Each time you press ILLUMINATION the color
changes:
WHITE (white)—SKYBLUE (sky blue)—
OCEANBLUE (ocean blue)—DEEPBLUE (deep
blue)—PINK (pink)—RED (red)—AMBER
(amber)—ORANGE (orange)—GREEN (green)
—PUREGREEN (pure green)— CUSTOM (cus-
tom)
Notes
! When the color of the display illumination is
set to RAINBOW, the button illumination is
changed to RAINBOW simultaneously. If you
want to change the button illumination,
change the display illumination to colors
other than RAINBOW, and then operate the
button illumination function.
! CUSTOM is an adjusted color that you create
(refer to Adjusting the illumination color on
page 44).
! If you do not operate the function within about
eight seconds, the display is automatically re-
turned.
Using the PGM button
You can operate the preprogrammed functions
for each source by using PGM on the remote
control.
The remote control CD-R510 is sold separately.
% Press PGM to turn pause on when se-
lecting the following sources:
! CD – Built-inCD player
! IPOD – iPod
! Multi CD – Multi-CD player
! BTAUDIO – Bluetooth audio player
! DVD – DVD player/multi-DVD player
# To turn pause off, press PGM again.
% Press PGM and hold to turn BSM on
when selecting tuner as the source.
Press PGM and hold until the BSM turns on.
# To cancel the storage process, press PGM
again.
% Press PGM and hold to turn BSSM on
when selecting television as the source.
Press PGM and hold until the BSSM turns on.
# To cancel the storage process, press PGM
again.
Operating this unit
En
47
English
Section
02