Filter
Top Products
Other connections
08
36
En
1 Use an HDMI cable to connect the HDMI IN 1 to 3
interconnect on this receiver subwoofer to an HDMI
output on your HDMI component.
Once this receiver subwoofer is properly connected to
your HDMI component, the
HDMI
indicator (red) lights
up on the display unit when you watch HDMI contents.
2 Use an HDMI cable to connect the HDMI OUT
interconnect on this receiver subwoofer to an HDMI
interconnect on a HDMI-compatible display.
• The arrow on the cable connector body should be
facing right for correct alignment with the connector
on the player.
3 Use the HDMI 1 to 3 button to select the HDMI input
you’ve connected to (for example, HDMI 2).
You can also use the display unit
INPUT SELECTOR
to
carry out this operation.
• Set the HDMI Mode in
HDMI mode setting
below to
Through Mode
if you want to hear HDMI audio
output from your TV or plasma television (no sound
will be heard from this receiver subwoofer).
• If the video signal does not appear on your TV or
plasma television, try adjusting the resolution
settings on your component or display.
HDMI mode setting
Specifies the routing of the HDMI audio signal out of this
receiver subwoofer (amp) or through to a TV or plasma
television. You cannot use a number of sound functions
of this unit when HDMI Mode is set to
Through Mode
.
Important
• Press to set the remote control to receiver
control mode in order to operate the receiver
subwoofer (make sure that the LCD displays the
RECEIVER
screen).
1 Press SETUP.
2 Select ‘HDMI Setup’ then press ENTER.
3 Select ‘HDMI Mode’, then press ENTER.
4 Adjust the setting then press ENTER to
confirm.
•
AMP Mode
– Output an HDMI audio signal from this
unit.
•
Through Mode
– Output an HDMI audio signal from
a TV or plasma television.
The
HDMI THROUGH
indicator lights.
About HDMI
HDMI (High-Definition Multimedia Interface) supports
both video and audio on a single digital connection for
use with DVD players, DTV, set-top boxes, and other AV
devices. HDMI was developed to provide the
technologies of High-bandwidth Digital Content
Protection (HDCP) as well as Digital Visual Interface
(DVI) in one specification. HDCP is used to protect digital
content transmitted and received by DVI-compliant
displays.
HDMI has the capability to support standard, enhanced,
or high-definition video plus standard to multi-channel
surround-sound audio. HDMI features include uncom-
pressed digital video, a bandwidth of up to 2.2 gigabytes
per second (with HDTV signals), one connector (instead
of several cables and connectors), and communication
between the AV source and AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
RCV
SETUP
ENTER
ENTER
ENTER
HTP-LX70_En.book 36ページ ２００７年９月２８日 金曜日 午前１０時５１分