Filter
Top Products
PLM860SAW
Specifications
5
Rev. 06/03
Ph: 800-421-6511
www.picomacom.com
860MHz Single-Channel PLL Saw-Filtered A/V Modulator
POWER
CH-
TEST
POINT
-30dB
RF OUTPUT
LEVEL
AUDIO
MODULATION
AURAL
LEVEL
VIDEO
MODULATION
860MHz Channelized-Agile PLL SAW-Filtered A/V Modulator
PLM860SAW
VIDEOIN
AUDIOIN
RFOUT
120VAC
60Hz10W
600WMAX
Front View
Rear View
Channels: 113 Channels
(CATV 23-135)
Frequency Range: 216 - 860 MHz
Output Impedance: 75 ohms
RF Output Level: 45 to 55 dBmV typical,
adjustable from front panel
Frequency Accuracy/Stability: ±10 kHz, ±5 kHz in
aeronautical band.
Conforms to FCC Docket 21006
Spurious Output: >-60 dB below video carrier
with A/V ratio @-15 dB
Audio/Video Ratio: Adjustable -7 to -18 dB
Audio Input Level: 0.5 V p-p for 25 kHz
peak deviation
Preemphasis: 75 microseconds
Flatness: 1.5 dB maximum
50 Hz to 15 kHz
PLM860SAW – Channel Specify CATV or UHF
RF
Audio
Video
General
Ordering Information
Video Input Level: 1.0 V p-p minimum for
87.5% modulation
Input Type: Composite video negative sync
Visual: C/N>62 dB @ 4 MHz BW
Frequency Response: ±1.5 dB 30Hz to 4.2 MHz
Differential Gain: <5%
Differential Phase: <5°
Hum And Noise: -60 dB @ 87.5% modulation
Phase Noise: -100 dBc/Hz
Meets FCC group delay predistortion correction requirement for
color transmission.
Power Input: 108-125 VAC 60 Hz 20 W
Operation Temperature: -10°C to 50°C
Dimensions: 19˝(L) x 3˝(D) x 1
3
/4˝(H)
Weight: 3.9 lbs.
Connectors: All “F” type
PLM860SAW Manual.qxd 7/31/03 2:28 PM Page 5