Filter
Top Products
5
CONTACT US 858.546.5050
www.picomacom.com
PICO MACOM
PANELS
Panels
Front and Rear Panels
11. I.F. Input:
Input from I.F. scrambler or I.F. output.
12. I.F. Output:
To I.F. input or to scrambling device.
13. Video Input:
Accepts video output from satellite receiver, VCR
and CCTV camera.
14. Audio Input:
Accepts audio output from satellite receiver, VCR
and CCTV camera.
15. SUB CATV:
When switch is in SUB position, channels 7 to 13
are converted to T7 to T13. When switch is in
CATV position, CATV channels 2 to 78 and 95 to
99 are available.
16. Fuse holder:
117VAC type - 0.5 amp, 125V slow-blow fuse.
220VAC type - 0.5 amp, 250V slow-blow fuse.
17. Convenience Outlet:
117VAC type - shown
220VAC type - 2 flat blade type (not shown)
18. Power Cord:
117VAC type - Three wire, standard U.S.A. type.
1. Power on LED:
Indicates power is on when lit.
2. Video/Audio Ratio adjustment:
Used to set level of audio carrier.
3. Audio Modulation LED:
Indicates aural over modulation level when lit.
4. Audio Modulation adjustment:
Used to set audio modulation (Volume).
5. Video Modulation adjustment:
Used to set video modulation.
6. Video modulation LED:
Indicates video over-modulation when lit.
7. Channel Select:
Dip switches are used to select desired channel.
8. RF Output Adjust:
Used to set output level.
9. -30dB Output test monitor:
Used to monitor RF output level.
10. RF Output:
Connect this port to distribution system.
Front and Rear Panels
PFAM 550SUB
550MHz Sub-Band Extended Agile A/V/ Modulator
RF OUT IF IN IF OUT VIDEO
IN
AUDIO
IN
250 VAC
0.5A
600VA MAX 117VAC
60 Hz 20 W
FUSE
1
2 3 4 5 6 8
CHANNEL
97
10
6141312111
SUB CATV
15 17
VIDEO
AUDIO
RATIO
AUDIO
OVER
MOD
AUDIO
MOD
VIDEO
OVER
MOD
VIDEO
MOD
POWER
RF LEVEL
18
R
TEST POINT
-30 dB