Philips SA5223 Stereo Amplifier User Manual


 
Philips Semiconductors Product specification
SA5223Wide dynamic range AGC transimpedance amplifier(150MHz)
2
1995 Oct 24 853-1816 15939
DESCRIPTION
The SA5223 is a wide-band, low-noise transimpedance amplifier
with differential outputs, incorporating AGC and optimized for signal
recovery in wide-dynamic-range fiber optic receivers, such as
SONET. The part is also suited for many other RF and fiber optic
applications as a general purpose gain block.
The SA5223 is the first AGC amplifier to incorporate internal AGC
loop hold capacitor, therefore, no external components are required.
The internal AGC loop enables the SA5223 to effortlessly handle
bursty data over a range of nA to mA of signal current, positive
direction (sinking) only.
FEATURES
Extremely low noise:
1.17pA
ń
Hz
Ǹ
Single 5V supply
Low supply current: 22mA
Large bandwidth: 150MHz
Differential outputs
Internal hold capacitor
Low input/output impedances
High power-supply-rejection ratio: 55dB
Tight transresistance control
High input overload: 4mA
2000V HBM ESD protection
PIN DESCRIPTION
D Package
IN
GND
2
OUT
V
CC
1
2
3
4
8
7
6
5
OUT
GND
4
GND
3
GND
1
SD00369
APPLICATIONS
OC3 SONET preamp (see AN1431 for detailed analysis
Current-to-voltage converters
Wide-band gain block
Medical and scientific instrumentation
Sensor preamplifiers
Single-ended to differential conversion
Low noise RF amplifiers
RF signal processing
ORDERING INFORMATION
DESCRIPTION TEMPERATURE RANGE ORDER CODE DWG #
8-Pin Plastic Small Outline
-40 to +85°C
SA5223D SOT96-1
For unpackaged die please contact factory.
ABSOLUTE MAXIMUM RATINGS
SYMBOL PARAMETER RATING UNITS
V
CC
Power supply voltage 6 V
T
A
Ambient temperature range -40 to +85
°C
T
J
Junction temperature range -55 to +150
°C
T
STG
Storage temperature range -65 to +150
°C
P
D
Power dissipation T
A
= 25
o
C (still air)
1
0.78 W
I
INMAX
Maximum input current 5 mA
NOTE:
1. Maximum power dissipation is determined by the operating ambient temperature and the thermal resistance θ
JA
= 158
o
C/W. Derate
6.2mW/
°C above 25°C.
RECOMMENDED OPERATING CONDITIONS
SYMBOL PARAMETER RATING UNITS
V
CC
Power supply voltage 4.5 to 5.5 V
T
A
Ambient temperature range: SA grade -40 to +85
°C
T
J
Junction temperature range: SA grade -40 to +105
°C