Filter
Top Products
Tuning to radio stations
1 Press SELECT SOURCE repeatedly to display TUNER.
2 Select a wave band by pressing BAND repeatedly.
➞The selected waveband is shown.
3 Keep 5 TUNING 6 (5 or 6 on the remote control)
pressed for approximately 1 second.
➞SEARCH is displayed and the radio tunes to a
station with sufficient strength. If an FM station is
received in stereo, STEREO is shown.
4 Repeat searching until you find the desired station.
• To tune to a weak station briefly press 5 TUNING 6
(5 or 6 on the remote control) as often as necessary
for optimum reception.
Programming radio stations
You may store up to 30 radio stations. The unit can select
and program stations by itself or you may choose them
yourself.
Automatic programming
Automatic programming will start at a chosen preset
number. From this preset number upwards, former
programmed radio stations will be overwritten. The unit
will only program stations which are not in the memory
already.
1 Press 4 PRESET 3 (PREV. ¡ or NEXT ™ on the remote
control) to select the preset number where programming
should start.
2 Keep PROGRAM on the unit pressed for more than
2 seconds.
➞AUTO is displayed and available stations are
programmed. Then the radio station using the highest
preset number is played.
Manual programming
1 Tune to a desired radio station (see “Tuning to radio
stations”).
2 Press PROGRAM on the unit.
➞PROGRAM flashes.
3 Press 4 PRESET 3 (PREV. ¡ or NEXT ™ on the remote
control) to assign a number from 1 to 30 to this station.
4 Press PROGRAM on the unit to confirm the setting.
➞PROGRAM goes off, the preset number and the
frequency of the preset station are displayed.
Tuning to preset stations
• Press 4 PRESET 3 (PREV. ¡ or NEXT ™ on the remote
control) until the preset number of the desired station is
displayed.
English
RADIO
11
PROGRAM
CLOCK/TIMER
B
A
N
D
T
IM
E
R
O
N
/O
FF
R
D
S
/N
EW
S
T
A
P
E C
O
U
N
T
ER
INCREDIBLE SURROUND
DBB
DSC
T
SOURCE
C
D
S
Y
N
C
H
R
O
R
E
C
O
R
D
REPEAT
REVERSE M
ODE
S
H
U
FF
LE
S
ID
E A
/B
P
U
S
PRESET
TUNING