Filter
Top Products
19
English
3140 115 27752
Clock/Timer
Specifications
AMPLIFIER
Output power ..........................................2 x 5 W RMS
.............................................................10 W + 10W MPO
Signal-to-noise ratio.......................... ≥ 65 dBA (IEC)
Frequency response .........40 – 20000 Hz, ± 3 dB
Input sensitivity AUX ....................... 0.5 V (max. 2 V)
Impedance loudspeakers......................................... 8 Ω
Impedance headphones ....................32 Ω -1000 Ω
CD PLAYER
Frequency range .................................. 20 – 20000 Hz
Signal-to-noise ratio............................................ 75 dBA
TUNER
FM wave range ...................................87.5 – 108 MHz
MW wave range................................531 – 1602 kHz
LW wave range .....................................153 – 279 kHz
Sensitivity at 75 Ω
– mono, 26 dB signal-to-noise ratio ............ 2.8 µV
– stereo, 46 dB signal-to-noise ratio ........ 61.4 µV
Selectivity .................................................................≥ 28 dB
Total harmonic distortion..................................... ≤ 5%
Frequency response ..... 63 – 12500 Hz (± 3 dB)
Signal-to-noise-ratio ...................................... ≥ 50 dBA
TAPE DECK
Frequency response
Normal tape (type I)...120 – 10000 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I).................................... 48 dBA
Wow and flutter ......................................... ≤ 0.4% DIN
SPEAKERS
Bass reflex system
Dimensions (w x h x d) .155 x 220 x 220 (mm)
GENERAL INFORMATION
AC Power...................................................230 V / 50 Hz
Dimensions (w x h x d) ... 140 x 223 x 253(mm)
Weight (with/without speakers) ..................................
...............................................................approx. 6.0 / 2.8 kg
Standby power consumption..........................< 3 W
Subject to modification
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time. The clock time
needs to be set first before the sleep timer can
be used.
¶ Press SLEEP on the remote
control once or more.
➜ Display shows SLEEP and
one of the sleep time options
in sequence: 60, 45, 30,15,
SLEEP OFF, 60... if you have
selected a time. Once SLEEP is activated, SLEEP
ON scrolls across the display at repeated
intervals.
TUNERAPE
SLEEP
U
X
S
C
INC. SURR
¶ To deactivate, press SLEEP on the remote
control once or more until SLEEP OFF is
shown, or press STANDBY ON on the system
or remote control.
➜ SLEEP OFF scrolls across the display.
pg 001-020/MC10/22-Eng 12/7/00, 1:30 PM19