Philips MC10 Stereo System User Manual


 
12
English
3140 115 27752
Compact Disc
SELECT
SOURCE
TIMER
ON OFF
INTERACTIVE SOUND
STANDBY
ON
SHUFFLE
REPEAT
RDS
BAND
PREV NEXT
TUNING
DBB
DSC
PRESETSTOP PLAYPAUSE
iR
SENSOR
VOLUME
INCREDIBLE SURR.
CLOCK
PROGRAM
CD
PROGRAM
IMPORTANT:
The lens of the CD player should never be
touched.
X
Playing a disc
This CD player plays Audio Discs including CD-
Recordables and CD-Rewritables.
CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1 Select CD source.
2 Press OPENCLOSE on the top
of the system to open the CD
compartment.
OPEN is displayed when you
open the CD compartment.
3 Insert a disc with the printed side
facing up and press down on OPENCLOSE
to close the CD door.
READ is displayed as the CD player scans the
contents of a disc, and then the total number of
tracks and playing time are shown.
4 Press PLAYPAUSE 2; (on the remote
control 2) to start playback.
Current track number and elapsed playing
time of the track are displayed during disc
playback.
5 To interrupt playback press PLAYPAUSE 2;
(on the remote control SIDE/;). Press
PLAYPAUSE 2; (on the remote control 2)
again to resume play.
The display freezes and the elapsed playing
time flashes when playback is interrupted.
6 To stop disc playback, press STOP 9.
Note: CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TAPE, TUNER or AUX.
– you select to standby.
– you press the tape deck PLAY
2
key.
Selecting a different track
Press PREV ¡1 or NEXT 2™ on the system,
(on the remote control ¡ or ) once or
repeatedly until the desired track number
appears in the display.
If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press PLAYPAUSE 2; (on the
remote control 2) to start playback.
Finding a passage within a track
1 Press and hold down on PREV ¡1 or NEXT
2™.
The disc is played at high speed and low
volume.
2 When you recognise the passage you want,
release PREV ¡1 or NEXT 2™.
Normal playback continues.
Note:
During a disc programme or if SHUFFLE/
REPEAT active, searching is only possible within the
same track.
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play modes
before or during playback. The play modes can
also be combined with PROGRAMME.
SHUFFLE .........tracks of the entire disc/
programme are played in
random order
SHUFFLE and REPEAT ALL…to repeat the
entire disc/ programme
continuously in random order
REPEAT ALL ...repeats the entire disc/
programme
REPEAT............plays the current track
continuously
OPEN CLOSE
pg 001-020/MC10/22-Eng 12/7/00, 1:29 PM12