Philips HTS3115 Stereo System User Manual


 
34
English
Audio Setup Page (underlined options are the factory default settings)
Speakers Volume Access the speaker’s level setup menu. Use W X keys to adjust
the volume level for each connected speaker between -6dB to
+6dB.
Speakers Delay Access the speaker’s distance setup menu. Use W X keys to set
the delay times for the centre and rear speakers based on the
listening position and distance.
Note: 1 ms increase/decrease of delay time is equivalent to 30 cm
change in distance. Use the longer delay time settings when the rear
speakers are closer to the listener than the front speakers.
Night Mode This mode optimises playback of sound at low volume. High
volume outputs will be softened and low volume outputs will be
enhanced to an audible level. This feature is only applicable for
DVD video discs with Dolby Digital mode.
{ On } – Turns on night mode.
{ Off } – Turns off night mode feature. Selects this to
enjoy the surround sound with its full
dynamic range.
HDMI Audio This setting is only required if you are using the DVD system’s
HDMI OUT socket to connect your TV or other display device
(see ‘Option 2: Connecting to a HDMI-compatible TV’).
Note: It may take a while for the DVD system and the input device to
communicate and initialise.
{ Off } – Select this if the playback audio format is not
supported by HDMI connection (e.g.
projector, SACD). It will turn off the HDMI
audio output.
{ PCM } – Select this to downmix the audio signals to
linear-PCM (2-channel).
{ All } – Select this to enjoy the multi-channel audio
output through the HDMI connection.
Note: It is not possible to listen to SACDs or copy-controlled DVD-
Audio CPPM (Content Protection for Playable Media) sources using the
HDMI connection.
DVD Setup Menu Options (continued)