Filter
Top Products
22
English
3139 115 21251
Tape Operation / Recording
Preparation for recording
1 Load a recordable tape into tape deck 1 with full
spool to the left.
2 Prepare the source to be recorded.
CD 1/2/3 – load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 2 with the full spool to the left.
AUX – connect external equipment.
When recording is in progress
➜ REC starts flashing.
● It is not possible to listen to another source.
● It is not possible to activate the timer function
during recording or tape dubbing.
One touch recording / Recording
the mixed sound (not available for all
versions)
1 Press CD 1/2/3 , TUNER or AUX to select
the source.
● You can connect a microphone to record the
mixed sound (refer to “Karaoke - Microphone
Mixing”).
2 Start playback of the selected source.
3 Press ● on tape deck 1 to start recording.
To stop recording
● Press 70 on tape deck 1.
CD Synchronised start recording
1 Press CD 1/2/3 to select the disc.
● You can programme the tracks in the order you
want them to be recorded (refer to “CD
Operation - Programming the disc tracks”).
2 Press ● on tape deck 1 to start recording.
➜ The disc will start playback automatically.
To stop recording
● Press 70 on tape deck 1, then press Ç to stop
disc playback.
Note:
– During CD synchronised start recording, do not
fast forward/rewind the tape in tape deck 2.
Dubbing tapes
1 Load the prerecorded tape in tape deck 2.
● Make sure both tapes have their full spool to the
left.
2 Press Å on tape deck 1 and followed by ●.
3 PressÉ on tape deck 2.
➜ Recording will start automatically.
● Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tape to side B
and repeat the procedure.
To stop dubbing
● Press 70 on tape deck 1 and 2.
Notes:
– Dubbing of tapes is possible only from tape
deck 2 to tape deck 1.
– To ensure good dubbing, use tapes of the same
length.
pg 001-028_255_21-Eng 12/24/01, 10:57 AM22