Philips C255 Stereo System User Manual


 
21
English
3139 115 21251
Playing tapes
To playback a selected tape deck
PressÉ on tape deck 1 or 2.
The tape will stop at the end of playback.
Continuous playback of two tapes
1 Load the tapes in tape deck 1 and 2.
2 PressÉ on tape deck 2.
3 Press Å on tape deck 1, followed byÉ .
Playback will begin from tape deck 2 and
continue with tape deck 1. It will stop at the end
of tape deck 1.
To interrupt playback
Press Å.
To resume playback, press Å again.
To stop playback
Press 70.
Rewinding / Fast forwarding
1 Stop playback, press à or á.
The tape will stop automatically at the end of
rewinding or fast forwarding.
2 Press 70 to stop rewinding or fast forwarding.
Note:
During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD or
TUNER, for example).
General information on
recording
If you do not intend to record via the
microphone, unplug the microphone to avoid
accidental mixing with other recording source.
For recording, use only tape of IEC type I
(normal tape).
The recording level is set automatically,
regardless of the position of the Volume, DBB,
DSC and so forth.
The tape is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.
To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
IMPORTANT!
Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
Recording is possible only on tape deck 1.
Tape Operation/Recording
pg 001-028_255_21-Eng 12/24/01, 10:57 AM21