Filter
Top Products
English
23
1 Press repeat on the remote control one or more times
during CD play.
➜ When REPEAT TRACK lights up, the current track will play
repeatedly. When REPEAT ALL lights up, the entire disc or
program plays repeatedly.
2 To return to normal play, press REPEAT on the remote
control one or more times until:
➜ The REPEAT text disappears from the display.
Note:
- You can use shuffle in combination with
REPEAT ALL
or
programmed play.
-
REPEAT
is also cleared when you open the disc tray.
•You can program up to 99 tracks to play in any desired
sequence.
•Tracks can be programmed more than once, but each time
counts as a track (STEP).
Programming
1 In Stop mode press PROG(ram) on the remote control to
enter Program mode.
➜ PROGRAM flashes and PROGRAM will appear on the
display.
2 Select the desired track numbers by turning the EASY
JOG/ENTER key left or right and store by pressing ENTER.
or:
Enter a track number with the number keys. For 2-digit
numbers, press the keys in rapid succession.
➜ The track will be stored in the program.
➜ The track number, total program time and the number of
programmed tracks (STEPS) are displayed.
3 Repeat step 2 for all tracks to be programmed.
4 Press STOP or PROG(ram) on the remote control to end
programming.
➜ PROGRAM lights continuously.
5 Press PLAY/PAUSE 2;to start programmed play.
Note:
- To review the program, press PROG(ram) on the remote
control, followed by 5 or 6 with the CD recorder in Stop
mode.
- To add more tracks to the program, repeat steps 1 to 5.
- If you try to store more than 99 tracks, PROG FULL will
appear on the display.
Clearing a program
1 Press STOP 9 if necessary to stop programmed play.
2 Press STOP 9 again to clear the program.
➜ PROGRAM will disappear from the display.
•The program is also cleared when you open the disc tray.
Erasing a track from a program
1 In Stop mode press PROG(ram) on the remote control to
enter Program mode.
2 Use 5 or 6 to select the track from to be deleted.
➜ The track number and program step will be shown on
the display.
3 Press CANCEL to erase the track from the program.
➜ The remaining program steps and the remaining playing
time on the program will be displayed.
DIGITAL
OPTICAL
ANALOG
I
I
CD
SYNC
PROGRAM
SHUFFLE
REPEAT
SCAN
ALL
MANUAL
TRACK
RW
REM
TRACKREC TIME
REMTOTAL
TIME STEPTRACK
FADE
278
11
DIGITAL
OPTICAL
ANALOG
I
I
CD
SYNC
PROGRAM
SHUFFLE
REPEAT
SCAN
ALL
MANUAL
TRACK
RW
REM
TRACKREC TIME
REMTOTAL
TIME STEPTRACK
FADE
123456789
10 11
Remarks about programming
DIGITAL
OPTICAL
ANALOG
I
I
CD
SYNC
PROGRAM
SHUFFLE
REPEAT
SCAN
ALL
MANUAL
TRACK
RW
REM
TRACKREC TIME
REMTOTAL
TIME STEPTRACK
FADE
12345678
Repeat CD, track or program
PLAYING PROGRAMMING