Filter
Top Products
English
13
For recording the following inputs are present:
- Digital optical input.
- Digital coaxial input.
- Analog input.
For playback the following outputs are present:
- Digital coaxial output.
- Analog output.
We advise you to connect these to the CD input on your
amplifier.
The connections you make will depend upon the possibilities
your audio equipment offers. Please refer to the user manuals
for your other audio equipment first.
Digital recordings (optical or coaxial) give the best
performance in audio and usability (e.g. auto-track).
(The digital optical connection is less sensitive to external
disturbances).
If your equipment does not offer digital connections, the high
quality Analog-Digital-Converter of your CD recorder will
ensure good audio performance when recordings are made
from the analog input.
Playback via the digital coaxial output of the CD recorder
gives the best audio performance.
If your equipment does not offer digital connections, the high
quality Digital-Analog-Converter of the CD recorder ensures a
good sound quality via the analog output.
We advise you to always establish both digital and analog
connections. This will mean that analog recordings can
always be made when digital recording is not possible.
We have described the most common ways of connecting the
CD recorder. If you still have difficulties with the connections,
please contact the Philips Consumer Service desk in your
area.
Analog connection is required for playback of CDs
(use cable 2) and for recording from external analog sources
(use cable 1).
Use the audio cables supplied. Connect the red plugs to the
R sockets, and the white plugs to the L sockets.
1 For recording, connect cable 1 between the ANALOG IN-
sockets on the CD recorder and the CDR LINE- or TAPE OUT-
sockets of an amplifier.
Note: For recording directly from a CD player, the analog
input of the CD recorder should be connected to the
analog output of the CD player.
2 For playback, connect cable 2 between the ANALOG OUT
sockets on the CD recorder and the input sockets of an
amplifier e.g. TAPE IN, CDR or AUX.
Note: Never use the PHONO input.
TAPE
OUT
L
R
L
R
IN
RECEIVER
OPTICAL
IN
ANALOG
IN
L
R
L
R
OUT
DIGITAL
IN
OUT
CD RECORDER
1
2
Analog connectionsConnections general
INSTALLATION