Philips MX2500D Home Theater System User Manual


 
English
8239 300 32892
24
DVD Setup Menu Options
Screen Saver turning on/off
The screen saver will help to prevent
your TV display device from becoming
damaged.
Follow the steps of Using the Setup
Menu and select :
> SCR SAVER
OFF
ON
SCREEN SAVER SETTING
TV SHAPE
TV SYSTEM
VIDOT OUT
SCR SAVER
OFF
Select this to disable the screen saver
function.
ON
Select this if you wish to turn off the TV
screen when play is stopped or paused
for more than five (5) minutes.
Setting the digital output
Set Digital Output according to the
optional audio equipment you connected.
Follow the steps of Using the Setup
Menu and select :
> DIGITAL OUT
ALL
PCM 96K
PCM 48K
OFF
SELECT AUDIO OUTPUT
DIGITAL OUT
CNTR DELAY
NIGHT MODE
REAR DELAY
TEST TONE
ALL
Select this if you have connected the
digital output to an optional piece of
audio equipment that has a multichannel
decoder.
PCM 96 kHz
Select this if the optional audio
equipment is capable of processing digital
signal input with sampling rates of 96 kHz.
However, if the sound output is distorted
or there is no sound, select 48 kHz
instead.
PCM 48 kHz
Select this if the optional audio
equipment is incapable of processing
96 kHz digital signal input. The signal will
then be converted to a standard signal
with sampling rates of 48 kHz.
OFF
Select this to deactivate the digital
output.
Helpful Hint:
Analogue signal will also be available
through the digital output.
TIPS: To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
001-035-MX2500D-78-Eng2 7/20/04, 3:12 PM24