Filter
Top Products
19
English
8240 009 34241
Clock/Timer
Setting the clock
1 In standby, press CLOCK.
➜ The clock digits for the hours flash.
2 Press VOLUME 3 / 4 to set the hours.
3 Press CLOCK again.
➜ The clock digits for the minutes flash.
4 Press VOLUME 3 / 4 to set the minutes.
5 Press CLOCK to confirm the time.
Setting the timer
● The system can be used as an alarm clock,
whereby the CD or TUNER is switched on at a
set time. The clock time needs to be set first
before the timer can be used.
● During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1 In any mode, press TIMER for more than 2
seconds.
2 Press VOLUME 3 / 4 (or press SOURCE) to
select sound source.
3 Press TIMER to confirm your desired mode.
➜ The selected source
CD
or
TUNER
TUNER
is shown. The clock digits for the hours flash.
4 Press VOLUME 3 / 4 to set the hours.
5 Press TIMER again.
➜ The clock digits for the minutes flash.
6 Press VOLUME 3 / 4 to set the minutes.
7 Press TIMER to confirm the time.
➜ The timer is now set and activated.
Activating and deactivating
TIMER
● In standby or during playback, press
TIMER once.
➜ Display shows TIMER if activated, and
disappears if deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time. The clock time
needs to be set first before the sleep timer can
be used.
● Press SLEEP on the remote
control once or more.
➜ Display shows SLEEP
and one of the sleep time
options in sequence: 60, 45,
30,15, SLEEP OFF, 60... if
you have selected a time. Once SLEEP is
activated, SLEEP ON scrolls across the display at
repeated intervals.
● To deactivate, press SLEEP on the remote
control once or more until SLEEP OFF is
shown, or press STANDBY-ON on the system
or remote control.
➜ SLEEP OFF scrolls across the display.
pg001-024_MME100_37-Eng 11/20/2003, 03:58 PM19