Filter
Top Products
23
MCV250/21-1
English
Clock/Timer
Clock setting
1 In standby mode, press and hold CLOCK SET.
➜ The clock digits for the hours flash.
2 Press VOLUME +/- to set the hours.
3 Press CLOCK SET again.
➜ The clock digits for the minutes flash.
4 Press VOLUME +/- to set the minutes.
5 Press CLOCK SET to confirm the time.
Timer setting
● The system can be used as an alarm clock,
whereby the CD, TUNER or TAPE is switched on
at a set time (one time operation). The clock
time needs to be set first before the timer can
be used.
● During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1 In standby mode, press TIMER SET for more
than two seconds.
2 Press SOURCE repeatedly to select the sound
source. Press TIMER SET again.
● Press VOLUME +/- to increase or decrease
the volume.
3 Press VOLUME +/- to set the hours.
4 Press TIMER SET again.
➜ The clock digits for the minutes flash.
5 Press VOLUME +/- to set the minutes.
6 Press TIMER SET to confirm the time.
➜ The timer is now set and activated.
Activating and deactivating timer
● In standby or during playback, press TIMER
SET once on the remote control.
➜ Display shows
if activated, and disappears
if deactivated.
Sleep timer setting
The sleep timer enables the system to switch off
by itself after a set period of time.
1 Press SLEEP on the remote control repeatedly
to select a preset time.
➜ The selections are as follows (time in
minutes):
90 ™ 80 ™ 70 ™ 60 ™ 50 ™ 40 ™ 30 ™
20 ™ 10 ™ OFF
➜ "SLEEP XX" or "OFF" is displayed. "XX" is the
time in minutes.
2 When you reach the desired length of time, stop
pressing the SLEEP button.
To deactivate the sleep timer
● Press SLEEP repeatedly until "OFF" is displayed,
or press the STANDBY ON button.
IS
DBB
DSC
REPEAT SHUFFLE REPEAT
A-B
MIX SEL
ALBUM ALBUM
DISPLAY
OSD
PBC RETURN DIGEST
GOTO RESUME SLOW AUDIO/VOCAL
CLOCK SET TIMER SLEEP MUTE
ECHO
KEY PROG