Filter
Top Products
14
MCV250/21-1
English
CD/VCD/MP3-CD Operation
Playing a disc
1 Select VCD/ CD source.
2 Press OPEN/CLOSE on the top of the system
to open the CD compartment.
➜ OPEN is displayed when you open the CD
compartment.
3 Load a disc with the printed side facing up. Push
the top panel to close.
➜ READING is displayed as the CD player
scans the contents of a disc, and then the total
number of tracks and playing time are shown.
(CD/ VCD only)
4 Playback starts automatically.
➜ Current track number and elapsed playing
time of the track are displayed during disc
playback.
5 To interrupt playback, press ÉÅ . Press it again
to resume playback.
6 To stop playback, press STOP 9.
Note: Playback will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TAPE, TUNER or AUX.
For MP3-CD only
● Load a MP-3 music disc on the disc tray.
➜ The total album number and total title/ track
number "18 120" will be displayed. MP3,
ALBUM and TRACK will be shown.
Notes:
–To ensure good system performance, wait until
the disc is completely read before proceeding.
–For MP3-CD, the disc reading time may exceed
10 seconds due to the large number of songs and
different formats compiled in one disc.
Selecting a different track
● Press 4 / ¢ once or repeatedly until the
desired track number appears in the display.
● Press digit 0-9 on the remote control to select
the desired track.(numbers consisting more than
2 figures must be keyed in within 2 seconds).
For MP3-CD only
To select a desired Album
● Press 4 or 3 repeatedly until the desired
Album appears on the display.
➜ ALBUM and “0XX 120” will be displayed.
To select a desired Title/ Track
● Press 4 / ¢ repeatedly until the desired
Title appears on the display.
● Use the digital keys on the remote control to
select the track.
➜ TRACK and “018 XXX” will be displayed.
Finding a passage within a track
To search for a particular passage during
playback:
1 Press and hold 4 / ¢.(CD only)
2 When you recognise the passage you want,
release 4 / ¢.
➜ Normal playback continues.
Note:
– During a disc programme, searching is only
possible within the same track.
For VCD only
● Press and hold 4 / ¢ to select a different
search speed and release the button until the
desired rewind or forward speed is shown on
the display or the TV.
➜ "REWINDX1"; "REWINDX2"; "REWINDX3"
or "REWINDX4" will be displayed on the TV
screen when you select a fast rewind search.
➜ ""FORWARDX1"; "FORWARDX2";
"FORWARDX3" or "FORWARDX4” will be
displayed on the TV screen when you select a
fast forward search.
➜ Normal playback will begin at the end of the
fast rewinding or forwarding of the selected
track.
● Playback returns to normal when PLAY ÉÅ is
pressed or when a new track is selected.
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback.
SHUFFLE .........tracks of the entire disc are
played in random order
SHUFFLE REP ALL…repeats the entire disc
continuously in random order
REP ALL ........... repeats the entire disc/ program
REP ...................plays the current track
repeatedly