Filter
Top Products
15
MCV250/21-1
English
CD/VCD/MP3-CD Operation
1 To select your play mode, press the REPEAT or
SHUFFLE on the remote control before or
during playback until the display shows the
desired function. (SHUFFLE, REP, REP ALL)
2 Press ÉÅ to start playback if in the STOP
position.
3 To return to normal playback, press REPEAT or
SHUFFLE until the various SHUFFLE / REPEAT
modes are no longer displayed.
● You can also press STOP 9 to cancel your play
mode.
Te xt display and ID3 Text
In CD mode
● Press DISPLAY repeatedly to see the following
information.
➜ Track number and elapsed play time of
current track.
➜ Remaining play time of current track.
➜ Total number of tracks played and total
played-back time.
➜ Total remaining number of tracks and total
remaining play time.
In MP3-CD mode
This feature is used to display the title and album
name for MP3-CD.
● Press DISPLAY repeatedly to display the title
or album name and ID3 Text.
Notes:
– Album No., Title No. & Playing time
– Title name album name, ID3 Text & playing time
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 20 tracks can be stored in the
memory in any order.
1 Load the desired disc on the disc tray.
2 Press the VCD/ CD button to select the
Source.
3 Press PROGRAM to start programming.
➜ A track number is shown and PROG appears.
4 Press 4 / ¢ (or Digits 0-9 on the remote
control) repeatedly to select the desired track.
● For MP3-CD, 4 / ¢ to select the desired
Album and Title for programming.
5 Press PROGRAM to store the track.
● Repeat steps 3–5 to store other tracks.
6 PressÉÅ to start programme playback.
● To end programming without starting playback,
press Ç once.
Notes:
–Programme cannot be used for VCDs when PBC
is switched on. Switch off PBC before storing tracks.
– If you attempt to programme more than 20
tracks, "FULL" will be displayed.
Erasing the program
You can erase the program by:
● pressing STOP 9 twice during playback;
● opening the CD compartment;
● change to other source
Playing a mixed mode disc
This set can play a mixed mode disc.
– mixture of audio CD and MP3-CD
– mixture of other combination may not be
operated normally.
1 As default, audio CD tracks will be read first.
2 Press MIX/SEL (on the remote control)
repeatedly to select other disc modes.
● MP3-CD:
➜ MP3 is displayed.
➜ TV screen, MP3 menu is displayed.
Note :
For protected CDs, “MIX CD-DA” is displayed on
your TV screen even if the disc does not have other
format. The MIX/SEL normal functions are not
available for protected CDs.