Filter
Top Products
21
English
3139 115 22881
Ta pe Operations/Recording
IMPORTANT!
Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
Preparation for recording
1 Press TAPE.
2 Load a recordable tape into the tape deck.
3 Press í or ë on the remote to select the
recording tape side.
➜ A appears on the display for the reverse
side.
➜ B appears on the display for the forward
side.
4 Press TAPE A/R on the remote repeatedly
to select a recording mode.
➜ å for recording on one side only.
➜
∂∂
∂∂
∂ for recording on both sides.
5 Prepare the source to be recorded.
CD – load the disc.
TUNER – tune to the desired radio station.
AUX – connect external equipment.
When recording is in progress
➜ REC starts flashing.
● It is not possible to change tape side.
● It is not possible to listen to another source.
● It is not possible to activate the timer
function.
One touch recording
1
Press CD, TUNER or AUX to select the
recording source.
2 Start playback of the selected source.
3 Press and hold REC until REC icon starts
flashing on the display panel to start
recording.
To stop recording
● Press Ç on the system.
Helpful Hint:
– One Touch Recording is not possible in TAPE
mode, "SELECT SOURCE" will appear.
CD Synchronised start recording
1 Press CD.
● If you want to start recording from a desired
track, press
í or ë.
➜ You can programme the tracks in the order
you want them to be recorded (refer to “CD
Operation - Programming the disc tracks”).
2 Press and hold REC to start recording.
➜ The disc will start playback automatically.
To select another track during
recording
1 Press ÉÅ to interrupt recording.
2 Press í or ë to select the desired track.
3 Press ÉÅ to resume recording.
To stop recording
● Press Ç.
➜ Recording and disc playback will stop
simultaneously.
001-025-MCM5-22-Eng 4/8/04, 12:3421