Filter
Top Products
Removing the dock adaptor
Push the dock in the direction of the arrow
shown in the figure below to un-latch the
adaptor, then take it out.
Playing iPod /Philips GoGear
1 Make sure the dock type is compatibly matched
with the player to be docked, as indicated on the
bottom of the dock.
2 Snap the dock adaptor of the correct type and
size into the dock (See “ dock adaptor ”).
3 Correctly place your Philips GoGear or iPod in
the dock.
4 Using the supplied docking cable, connect the
DOCKING OUT jack and Mini-USB port on the
dock to DOCKING IN jacks (L and R) and Mini-
USB port on the main set, marked-red toR
DOCKING IN jack and marked-white to L
DOCKING IN jack.
5 Press SOURCE repeatedly or DOCK on the
set (or DOCK on the remote) to select DOCK
source.
● Make sure that you have powered on Philips
GoGear before selecting DOCK source.
➜ On the MCM108D's display, "GoGear" is
displayed if Philips GoGear is connected, or
"iPod" is displayed if iPod is connected.
● The connected player will play automatically.
Dock
Adaptor for iPod
Adaptor for Philips GoGear
12
Notes:
– By using the buttons ( 2; , ¡1, 2™ and
VOLUME ) on the MCM108D and its remote
control, the following disc playback features are
available: Play/Pause, selecting next/previous track,
fast forwarding/rewinding and changing volume.
– The buttons ( 2;, ¡1, 2™ and VOLUME ) on
the MCM108D and its remote control can work
only with playback of the audio contents stored on
the docked player.
– Stop (Ç) function of disc playback is not
available to the docked player.
Charging iPod/Philips GoGear
battery using the dock
Docking your iPod/Philips GoGear and
connecting the dock to MCM108D, you can
charge the iPod/GoGear in the standby mode
and power-on mode of MCM108D.