Filter
Top Products
12
2 Ensure that the MCi300 is turned on.
First-time setup when you connect
the MCi300 to the power supply
(continue with step 5-7).
Change network settings after rst-
time setup (continue with step 3-7).
3 On the item, press MENU.
4 Press or , then to select[Settings] >
[Network ].
5 Press or , then to select[Wired] >
[Static].
6 Press the alphanumeric buttons to enter
the static IP address, then press
.
7 Press or , then to select (Apply
settings?) [Yes].
The MCi300 displays a conrmation
screen that the settings are saved.
•
•
»
9 Press the alphanumeric buttons to enter
the static IP address, then press
.
10 Press or , then to select (Apply
settings?) [Yes].
The MCi300 displays a conrmation
screen that the settings are saved.
Create wired connection
with automatic IP address
This chapter shows you how to create a wired
connection to a home network with automatic
IP address.
1 Use an Ethernet cable (sold separately)
to connect the MCi300 to the router that
is connected to your home network with
broadband Internet access.
2 Ensure that the MCi300 is turned on.
First-time setup when you connect
the MCi300 to the power supply
(continue with step 5).
Change network settings after rst-
time setup (continue with step 3-5).
3 On the MCi300, press MENU.
4 Press or , then to select[Settings] >
[Network ].
5 Press or , then to select[Wired] >
[Automatic] > (Apply settings?) [Yes].
The MCi300 displays a conrmation
screen that the settings are saved.
Create wired connection
with static IP address
This chapter shows you how to create a wired
connection to a home network with automatic
IP address.
1 Use an Ethernet cable (sold separately)
to connect the MCi300 to the router that
is connected to your home network with
broadband Internet access.
»
•
•
»
EN