Filter
Top Products
11
5 Press or , then to select[Settings] >
[Network ].
6 Press or to select[Wireless ].
7 Press .
8 Press or , then to select network.
Enter encryption key with the remote
control, then press OK
/ to
continue (if required).
9 Press or , then to select [Automatic]
> (Apply settings?) [Yes].
The MCi300 displays a conrmation
screen that the settings are saved.
Create wireless connection
with static IP address
This chapter shows you how to create a
wireless connection to a home network with
static IP address.
1 Ensure that your encryption key (if
required) is available.
2 Ensure that your wireless access point or
wireless router with broadband Internet
access is turned on.
3 Ensure that the MCi300 is turned on.
There are two setup methods:
First-time setup when you connect
the MCi300 to the power supply
(continue with step 6-10).
Change network settings after rst-
time setup (continue with step 4-10).
4 On the MCi300, press MENU.
5 Press or , then to select[Settings] >
[Network ].
6 Press or , then to select[Wireless ].
7 Press or , then to select network.
Enter encryption key with the remote
control, then press OK
/ to
continue (if required).
8 Press or , then to select[Static].
•
»
•
•
•
4 Connect to a
home network
Before you connect the MCi300 to a router:
Ensure that the PC meets the minimum
requirements.
Y
ou can choose one of these modes of
connection:
Wireless
connection with automatic IP
address (see ‘Create wireless connection
with
automatic IP address’ on page 11)
Wireless
connection with static IP address
(see ‘Create wireless connection with static
IP
address’ on page 11)
Wired
connection with automatic IP
address (see ‘Create wired connection
with
automatic IP address’ on page 12)
Wired
connection with static IP address
(see ‘Create wired connection with static
IP
address’ on page 12)
Create wireless connection
with automatic IP address
This chapter shows you how to create a
wireless connection to a home network with
automatic IP address.
1 Ensure that your encryption key (if
required) is available.
2 Ensure that your wireless access point or
wireless router with broadband Internet
access is turned on.
3 Ensure that the MCi300 is turned on.
There are two setup methods:
First-time setup when you connect
the MCi300 to the power supply
(continue with step 7-9).
Change network settings after rst-
time setup (continue with step 4-9).
4 On the MCi300, pess MENU.
•
•
•
•
•
•
•
Connect to a home network
English
EN