Philips MC-i250 Speaker System User Manual


 
33
English
This source enables you to connect external
sound devices and play the sound through your
system’s built-in speakers.
Connecting an external device
Connect the audio out terminals of the external
device to the AUX/CDR IN terminals of your
system.
Listening to an external source
1 Press AUX to select “
AUXAUX
AUXAUX
AUX” when connected to
a TV, VCR or Laser Disc player.
OR
Press AUX again to select “
CDR/DVDCDR/DVD
CDR/DVDCDR/DVD
CDR/DVD” when
connected to a CD recorder or DVD player.
2 Play the external device.
When CDR/DVD mode is selected, any audio
equipment connected to the LINE OUT
terminals of this micro system will be muted.
You will not be able to record or listen to the
sound on equipment connected to the LINE
OUT terminal.
Notes:
You are advised not to listen to and record from
the same source simultaneously.
All the sound control features (INCR. SURR.,
BASS/TREBLE, for example) are available for
selection.
Refer to the operating instructions for the
connected equipment for details.
External Sources
SLEEPINCR. SURR. ALLREPEATSHUFFLEDIM 123 AMFMMW LW
REC
NEWS
1 2 3
NAVIGATE PLAY FAVORITES
CD
INTERNET
OPTIONS AUX
TUNER
PC LINK
VIEW
FAVORITES
CANCELRESUME
OK
ENTERBACK
iR
To clean a CD, wipe it in a straight
line from the center toward the
edge using a soft, lint-free cloth. A
cleaning agent may damage the
disc! Write only on the printed
side of a disc and only with a soft
felt-tipped pen.
Clean the system with a soft,
slightly dampened, lint-free
cloth. Do not use any
cleaning agents as they may
have a corrosive effect.
Maintenance
SLEEPINCR. SURR. ALLREPEATSHUFFLEDIM 123 AMFMMWLW
REC
NEWS
1 2 3
NAVIGATE PLAY FAVORITES
STANDBYON
ECO POWER
CD
CONNECT
OPTIONS
STOPPAUSE
OK
ENTERBACK
AUX
TUNER
PC-LINK
OPEN/
CLOSE
VIEW
FAVORITES
WOOX TREBLEBASS
SOUND JOG
Do not expose the system
batteries or discs to
humidity, rain, sand or
excessive heat (caused by
heating equipment or direct
sunlight). Always keep the disc tray closed to
avoid dust on the lens.