Filter
Top Products
19
English
Switching the system on
In standby mode
● Press STANDBY ON to switch on the last
selected source.
● Press PC LINK, INTERNET, CD, TUNER,
or AUX to select the desired source.
In Eco Power Standby mode
● Press STANDBY ON on the system.
● Press PC LINK, CD, TUNER, INTERNET or
AUX on the remote control.
Switching the system to standby
mode
● Press STANDBY ON (or B on the remote
control).
➜ The clock will appear on the display when the
system is in standby mode.
Switching the system to Eco
Power standby mode (<0.5W)
● Press and hold STANDBY ON (or B on the
remote control) for more than three seconds.
➜ "
ECO POWER MODEECO POWER MODE
ECO POWER MODEECO POWER MODE
ECO POWER MODE" is displayed, then the
display screen will go blank.
➜ The low power LED will be lighted.
Power saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 30 minutes after a
disc has stopped playing.
Dim mode
You can select the desired brightness for the
display.
● Press DIM on the remote control repeatedly to
select DIM 1, DIM 2, DIM 3 or DIM OFF display
mode.
➜ DIM and the corresponding dim level will
appear on the display, except for DIM OFF mode.
DIM
mode
1
2
3
OFF
LEDs
on
on
off
on
Volume control
Adjust SOUND JOG (or press VOLUME
+/- on the remote control) to increase or
decrease the volume level.
➜ "
-XX dB-XX dB
-XX dB-XX dB
-XX dB" is displayed. "
XXXX
XXXX
XX" denotes the
volume level.
To listen through the headphones
● Connect the headphones plug to the n socket
at the front of the system.
➜ The speakers will be muted.
To switch off the volume temporarily
● Press MUTE on the remote control.
➜ Playback will continue without sound and
"
MUTE ONMUTE ON
MUTE ONMUTE ON
MUTE ON" is displayed.
● To restore the volume, press MUTE again or
increase the volume level.
Basic Functions