Philips MC-I200MC-I200 Stereo System User Manual


 
21
English
Set options
An option menu exists for each source/service
except for TUNER and AUX. The available
option menus are detailed within the respective
source/service sections in this manual.
1 Press INTERNET followed by OPTIONS.
2 Press the soft key (!) on the system to select
SETSET
SETSET
SET”.
Below are some possible options :
–SELECT USER
–NETWORK CONFIG
–PROXY CONFIG
–NETWORK INFO
–PRODUCT INFO
–DISABLE INTERNET
–ONLINE UPGRADE
–RESET SETTINGS
Note:
This option list may be extended or changed if
new services become available.
3 Use the navigation jog (or press 3 / 4 on the
remote control) to select the desired set options
and press OK (2) to confirm.
Select User
The user menu displays the available account(s)
for easy selection. Select a user account to
retrieve user specific favorites within a source/
service.
Network Configuration
Depending on the type of Internet connection
you have, “DHCP” or “STATIC” must be selected
to enable your system to connect to the
Internet. Check with your service provider to
obtain the correct IP mode.
For users whose systems are set to “STATIC”
mode, the following additional input fields have
to be completed :
SET IP
SET NETMASK
SET GATEWAY
SET DNS 1
SET DNS 2
Check with your service provider and enter the
necessary connection settings for these options.
Note:
The change of network configuration is only
necessary if your system does not work with the
default configuration.
Proxy Configuration
Check with your service provider to obtain the
correct proxy name and proxy port.
Network Information
This feature reports the details of your network
connection.
Product Information
Check the current system information.
Internet Audio