Filter
Top Products
18
English
3139 115 20751
Notes:
– If the total playing time is more than "99:59"
or if one of the programmed tracks has a number
greater than 30, then "--:--" will appear on the
display instead of the total playing time.
– If you attempt to program more than 40 tracks,
"PROGRAM FULL" will be displayed.
– If you press any of the CD DIRECT 1/2/3
buttons on the remote control, the system will play
the selected disc or track, and the stored program
will be ignored temporarily. The PROGRAM symbol
also will disappear temporarily from the display. It
will reappear when playback of the selected disc
ends.
– During programming, if no button is pressed
within 20 seconds, the system will exit the Program
mode automatically.
To review the program
● Stop playback and press í or ë repeatedly.
● To exit review mode, press Ç.
To erase the entire program
● Press Ç once when playback is stopped or
twice during playback.
➜ "PROGRAM CLEARED" will be displayed.
➜ PROGRAM will disappear from the display.
Note:
– The program will be erased when the system is
disconnected from the power supply or when the
disc tray is opened.
Repeat
The current track, a disc, all available discs or all
programmed tracks can be played repeatedly.
1 Press REPEAT on the remote control
repeatedly to select various repeat modes.
● In normal playback
➜ "TRACK" – to repeat the current track,
REPEAT will appear on the display.
➜ "DISC" – to repeat the entire disc, REPEAT
and DISC will appear on the display.
➜ "ALL DISC" – to repeat all available discs,
REPEAT, DISC and ALL will appear on the display.
● In program playback
➜ "TRACK" – to repeat the current
programmed track, REPEAT and PROGRAM will
appear on the display.
➜ "PROGRAM" – to repeat all programmed
tracks, REPEAT, PROGRAM, DISC and ALL will
appear on the display.
CD Operation
● The selected track/disc(s)/program will now be
played repeatedly until you press Ç.
2 To resume normal playback, press REPEAT
until the "OFF" mode is displayed.
➜ REPEAT will disappear from the display.
Notes:
– Selecting SHUFFLE during repeat playback will
cancel all repeat modes.
– Pressing any CD OPEN•CLOSE button will
cancel all repeat modes.
Shuffle
All the available discs and their tracks or all the
programmed tracks can be played in random
order.
1 Press SHUFFLE on the remote control.
➜ SHUFFLE will appear on the display.
● The discs and the tracks will be played in
random order until you press Ç.
2 To resume normal playback, press SHUFFLE
again.
➜ SHUFFLE will disappear from the display.
When select REPEAT mode during
shuffling
● In normal shuffled playback
➜ "TRACK" – to repeat shuffling the current
track.
➜ "ALL DISC" – to repeat shuffling all
available discs.
● In program shuffled playback
➜ "TRACK" – to repeat shuffling the current
programmed track.
➜ "PROGRAM" – to repeat shuffling all
programmed tracks.
Note:
– Pressing any CD OPEN•CLOSE button will
cancel shuffle mode.
For Recording, please refer to “Tap e
Operation/Recording”.
pg 001-030/C50-C70/37-Eng 3/7/01, 3:48 PM18