Philips MC-200 Stereo System User Manual


 
22
English
3140 115 28691
RADIO RECEPTION
Radio reception is poor. If the signal is too weak, adjust the antenna or
connect an external antenna for better reception.
Increase the distance between the Micro HiFi
System and your TV or VCR.
TAPE OPERATION / RECORDING
Recording or playback cannot be made. Clean deck parts, see “Maintenance”.
Use only normal (IEC I) tape for recording.
CHECK TAPE is displayed. Apply a piece of adhesive tape over the missing
tab space.
The tape deck door cannot open. Remove and reconnect the AC power plug and
switch on the system again.
GENERAL
The system does not react when buttons Remove and reconnect the AC power plug and
are pressed. switch on the system again.
Sound cannot be heard or is of poor Adjust the volume.
quality. Disconnect the headphones.
Check that the speakers are connected correctly.
Check if the stripped speaker wire is clamped.
The left and right sound outputs are Check the speaker connections and location.
reversed.
The remote control does not function Select the source (CD or TUNER, for example)
properly. before pressing the function button (É,í,ë).
Reduce the distance between the remote control
and the system.
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
Replace the batteries.
Point the remote control directly toward
IR sensor on the front of the system.
The timer is not working. Set the clock correctly.
Press TIMER ON•OFF to switch on the timer.
If a recording is in progress, stop the recording.
The Clock/Timer setting is erased. Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
Troubleshooting
pg 001-022/MC200/22-Eng 10/5/01, 4:26 PM22