Philips MC-200 Stereo System User Manual


 
19
English
3140 115 28691
Clock/Timer
PROGRAM
INTERACTIVE SOUND
STANDBY
ON
SHUFFLE
REPEAT
RDS
DBB
DSC
PRESETSTOP PLAYPAUSE
iR
SENSOR
VOLUME
INCREDIBLE SURR.
CLOCK
TIMER
ONOFF
CD
TIMER
SELECT
SOURCE
PROGRAM
TUNING
TUNING
RECORD
REV MODE
BAND
SIDE A/B
PREV NEXT
REV MODE
BAND
SIDE A/B
Setting the clock
There are two possible methods for setting the
clock: manually or automatically by using RDS.
Automatic clock setting (RDS versions
only)
1 Tune to a RDS station (see “Radio Reception”).
2 Press CLOCK for more than 2 seconds.
SEARCH RDS TIME is displayed for a
maximum of 90 seconds; the time is then
displayed.
NO RDS TIME is displayed if no time signal
has been received and you will have to set the
clock manually.
Manual clock setting
1 In standby, press CLOCK.
The clock digits for the hours flash.
2 Tur n VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
3 Press CLOCK again.
The clock digits for the minutes flash.
4 Tur n VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
5 Press CLOCK to confirm the time.
Setting the timer
The system can be used as an alarm clock,
whereby the CD, TUNER or TAPE is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
You can also use it to record a favourite tuner
programme at a set period (see “Recording
timer”)
During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1 In any mode, press TIMER ONOFF for more
than 2 seconds.
2 Tur n VOLUME clockwise to select sound
source.
Display sequence shows CD, TUNER, TAPE or
REC TUNER.
3 Press TIMER ONOFF to confirm your
desired mode.
The selected source
CD
or
TUNER
TUNER
is shown. Display sequence scrolls SET ON
TIME and TIMER flashes. The clock digits for the
hours flash.
4 Tur n VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
5 Press TIMER ONOFF again.
The clock digits for the minutes flash.
6 Tur n VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
7 Press TIMER ONOFF to confirm the time.
The timer is now set and activated.
Activating and deactivating
TIMER
In standby or during playback, press
TIMER ONOFF once.
Display shows TIMER if activated, and
disappears if deactivated.
pg 001-022/MC200/22-Eng 10/5/01, 4:26 PM19