Philips MC-200 Stereo System User Manual


 
20
English
3140 115 28691
Specifications
AMPLIFIER
Output power .......................................2 x 10 W RMS
............................................................20 W + 20 W MPO
Signal-to-noise ratio.......................... 65 dBA (IEC)
Frequency response .........40 – 20000 Hz, ± 3 dB
Input sensitivity AUX ....................... 0.5 V (max. 2 V)
Impedance loudspeakers .........................................8
Impedance headphones ....................32 -1000
CD PLAYER
Frequency range .................................. 20 – 20000 Hz
Signal-to-noise ratio............................................75 dBA
TUNER
FM wave range ...................................87.5 – 108 MHz
MW wave range................................531 – 1602 kHz
LW wave range .....................................153 – 279 kHz
Sensitivity at 75
– mono, 26 dB signal-to-noise ratio ............ 2.8 µV
– stereo, 46 dB signal-to-noise ratio ........ 61.4 µV
Selectivity................................................................. 28 dB
Total harmonic distortion..................................... 5%
Frequency response ..... 63 – 12500 Hz (± 3 dB)
Signal-to-noise-ratio ...................................... 50 dBA
TAPE DECK
Frequency response
Normal tape (type I)......80 – 12500 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I).................................... 50 dBA
Wow and flutter......................................... 0.4% DIN
SPEAKERS
Bass reflex system
Dimensions (w x h x d) .155 x 220 x 215 (mm)
GENERAL INFORMATION
AC Power.....................................220 – 230 V / 50 Hz
Dimensions (w x h x d) ... 140 x 223 x 264(mm)
Weight (with/without speakers) ..................................
...............................................................approx. 7.0 / 3.2 kg
Standby power consumption..........................< 3 W
Subject to modification
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time. The clock time
needs to be set first before the sleep timer can
be used.
Press SLEEP on the remote
control once or more.
Display shows SLEEP and
one of the sleep time options
in sequence: 60, 45, 30,15,
SLEEP OFF, 60... if you have
selected a time. Once SLEEP is activated, SLEEP
ON scrolls across the display at repeated
intervals.
To deactivate, press SLEEP on the remote
control once or more until SLEEP OFF is
shown, or press STANDBY ON on the system
or remote control.
SLEEP OFF scrolls across the display.
Clock/Timer
U
FFLE SLEEP
TAPE AUX
pg 001-022/MC200/22-Eng 10/5/01, 4:26 PM20