Filter
Top Products
Additional TV channel settings
You can change the name of a TV channel. If the reception
of a TV channel is poor, you can change the “TV system”,
switch off Stereo/2-channel sound and change the tuning of
the TV channel slightly.
1 Press DVD/MON as often as necessary to see the
TV channel currently selected on the DVD recorder
system.
2 Press CH+ or CH
–
or 0–9 repeatedly to select a
TV channel on the DVD recorder system.
3 Press SYSTEM MENU.
4 Press 1 as often as necessary to select A.
5 Press 4 or 3 as often as necessary to select
y Installation. Next, press 2 to confirm.
6 Press 4 as often as necessary to select Manual search.
Next, press 2 to confirm.
7 Press 4 repeatedly to select either
➜ TV channel name: to set the TV channel name,
➜ Decoder: to decode an encoded TV channel. See “Using
a decoder to decode a TV channel”,
➜ TV system: to change the TV system of the TV channel,
➜ NICAM: to switch NICAM on/off,
➜ Fine tuning: to change the tuning of the TV channel
slightly.
TV channel name
1 Press 2 repeatedly to select a character of the TV channel
name.
2 Press 3 or 4 repeatedly to set/change the desired
character.
3 Repeat steps 1 and 2 for all characters of the channel
name.
Note: Channel names are limited to 5 characters.
4 Press OK to store the TV channel name.
5 Press SYSTEM MENU to end.
TV system
If the TV system of the TV channel and that of your TV
are not the same, the sound and/or the picture may be
distorted or missing. Usually the TV system is detected
automatically.
1 Press 2 repeatedly to select the TV system (PAL-BG,
PAL-I, PAL-DK, SECAM, SEC-BG, SEC-DK) which
produces the clearest sound and picture on your TV.
Note: If you change TV system to a setting not supported by
your TV set, the picture and/or sound may be missing.
2 Press OK to store the setting.
3 Press SYSTEM MENU to end.
NICAM
1 Press 2 repeatedly to switch NICAM on or off:
➜ On: Stereo and 2-channel sound is supported.
➜ Off:To improve the sound quality of a weak TV channel,
only mono sound is supported.
2 Press OK to store the setting.
3 Press SYSTEM MENU to end.
Fine tuning
1 If the reception of the TV channel is distorted, press 3 or
4 repeatedly to change the tuning of the TV channel
slightly.
2 Press OK to store the setting.
3 Press SYSTEM MENU to end.
System settings
52
English
Channel/freq. CH
Entry/search 48
Programme number 07
TV channel name PHI
Decoder On
TV system PAL-BG
NICAM On
Fine tuning 0
To exit press
SYSTEM MENU
Installation
Manual search