Filter
Top Products
L Searching by keying in a time
(not on MP3-CDs)
Within a title/track you can select the elapsed playing time
where to start playback.This feature may not be available
on all discs.
1 Press SYSTEM MENU during playback to enter the system
menu.
2 Press 2 as often as necessary to select L.
3 Press 4 to confirm the selection.
➜ Playback is paused.
➜ A time entry box appears in which the elapsed playing
time of the current disc is displayed.
4 Use the numerical buttons to key in the desired hour,
minutes and seconds of the playing time where playback
should start.
Note: If the selected title is shorter than the keyed in time
position, the digits start blinking. Key in a new time position.
5 Press OK to confirm your selection.
➜ The time entry box disappears and playback starts from
the selected time position.
00
To switch off the system menu bar press SYSTEM MENU.
Scan
This function allows you to play the first 10 seconds of
each chapter (DVD-Video discs) or track (CD) of the disc.
● Press REC / PLAY MODE repeatedly during
playback to select
6
.
➜ The first 10 seconds of each
chapter/track are played.
00
To end scanning and to resume normal playback press
STOP 9 and then PLAY 2.
Repeat and playback in
random order
Depending on the disc type, you can select different types
of playback.
1 Select the desired chapter, title or disc and start playback.
2 Press REC / PLAY MODE repeatedly during playback to
select either (if available):
➜
2
:The current chapter is played repeatedly (on
DVD-Video discs only).
➜
3
:The current title is played repeatedly (on
DVD-Video discs only).
➜
5
:The entire disc is played repeatedly (on (Super)
Video CDs, audio CDs and MP3 CDs only).
➜
/
: playback in random order (on audio CDs and
MP3 CDs only)
00
To return to normal playback press PLAY MODE
repeatedly until
=
appears.
Repeating a specific sequence (not
on MP3-CDs)
You can mark a specific sequence within a title/chapter for
repeating.
1 Press PAUSE ; during playback to mark the starting point
of the sequence.
➜ The still picture shown is the selected starting point.
2 Press REC / PLAY MODE repeatedly until
0
is shown.
➜ The selected starting point is confirmed.
3 Press PLAY 2.
➜ Playback continues.
4 As soon as the desired end point of the sequence is played,
press OK.
➜
1
is shown and the end point is confirmed.
➜ The entire selected sequence is played repeatedly.
00
To return to normal playback press PLAY MODE
repeatedly until
=
appears.
Disc playback
25
English
6