Filter
Top Products
English
43
3139 115 2xxx1
AV subwoofer adjustment
You can adjust the AV subwoofer output
level to enhance the bass output.
1 Start playing a music disc that has lots of
mid-bass sounds, then press
SUBWOOFER on the remote.
2 Press VOL +/- to select the desired
bass level.
➜ If the volume control is not used
within five seconds, it will resume its
normal volume control function.
Selecting surround sound
● Press SURR (SURROUND) to select :
MULTI-CHANNEL or STEREO.
➜ The availability of the various surround
sound modes depends on the sound
available on the disc.
➜ The available output modes for Multi-
channel include: Dolby Digital, DTS
(Digital Theatre Systems) Surround and
Dolby Pro Logic II.
➜ Stereo broadcasts or recordings will
produce some surround channel effects
when played in a surround mode.
However, mono (single channel sound)
sources will not produce any sound from
the surround speakers.
Helpful Hint:
– You are not able to select the surround
sound mode if the system setup menu is
turned on.
Selecting digital sound effects
Select a preset digital sound effects that
matches your disc’s content or that
optimises the sound of the musical style
you are playing.
● Press SOUND to select the available
sound effect.
When playing movie discs or in TV mode,
you can select :
CONCERT, DRAMA, ACTION or SCI-FI.
When playing music discs or while in
TUNER or AUX/DI mode, you can select :
ROCK, DIGITAL, CLASSIC or JAZZ.
Helpful Hint:
– For flat sound output, select CONCERT or
CLASSIC.
Volume control
● Adjust VOLUME control (or press
VOL +/- on the remote) to increase
or decrease the volume level.
➜ "VOL MIN" is the minimum volume
level and “VOL MAX” is the maximum
volume level.
To turn off the volume temporarily
● Press MUTE on the remote.
➜ Playback will continue without sound
and "MUTE" appears.
➜ To restore the volume, press MUTE
again, or increase the volume level.
Sound and Volume Controls (continued)
001-049 HTS8000S-00-Eng 22/04/2005, 04:07 PM43